Top 9 Fotga Follow Focus – Camera Lens Rapid-Focusing Levers

As an Amazon Associate I earn from qualifying purchases.

1. FOTGA

#ad

Fotga DP500III Follow Focus with A/B Hard Stops,15mm Quick Release Rod Clamp for Film Movie Video Making Canon Nikon Sony Olympus Blackmagic DSLR Cinema Camera Video Mirrorless Camera Cine Lens

#ad
FOTGA #ad - Well-made gearbox, tightness adjustablelong-life precision engineered gearbox enables accurate and reliable focusing, 2 levels adjustable damping. Drive gear can be mounted from both side. Works for both right-handed and left handed, Drive Gear Interface: Compatible with JTZ X Type Interface Standard. No backlash, newly design on its inner structure to reach a high level, comfortable rubber-covered handwheelmaterial: sturdy metal cnc Machined, while the damping gives virtually zero backlash
BrandFOTGA #ad
ManufacturerFOTGA #ad
Height3.54 Inches
Length13.78 Inches
Weight1.1 Pounds
Width3.94 Inches
Part NumberDB768
ModelDP086-P

2. FOTGA

#ad

Fotga Upgraded DP500 Mark III Dampen Follow Focus for 15mm Rods Rig Fit for All DSLR Video Cameras Blackmagic BMCC BMPCC 5DIII 5DIV Sony A7R A7S A7SII A7III A7SIII A9 GH3 GH4 GH5 GH5s D500

#ad
FOTGA #ad - The jtz x type standard is the ultimate interfaces for all Fotga DP500 series, all future upgrade version like 500IV/V will follow this standard to make accessories compatible. Fotga dp500iii follow focus, compatible with 15mm rail system.

Dampened design gives virtually zero backlash. Innovative digitized and visual monitoring with the follow focus extension, make it possible to operate anywhere to go for an independent photographer or a team. Made of aluminum, cnc machined. Drive gear M08 can be mounted from both side. Works for both right-handed and left handed,. The addition of new heat resistant engineering rubber cover on handwheel, relative to the primary bare metal handwheel, is more easy to operate in cold weather and regions, and also more comfortable in peacetime use.

The ultimate digital interface make the system smarter and digitized: compatible with jtz x type standard drive gear interface and mark ring interface. Mark ring can be repeatly used, and also can be removed and replaced.
BrandFOTGA #ad
ManufacturerFOTGA #ad
Height11.73 Inches
Length3.94 Inches
Weight2.07 Pounds
Width9.37 Inches
Part NumberDB770
ModelDB770

3. FOTGA

#ad

A7 A7R A7S II III A9, Fotga Upgrade DP500IIS Quick Rlease Dampen Follow Focus A/B Hard Stop for 15mm Rail DSLR Rig 5DII III IV 7D D90 D5 D500 D850 DSLR Camera, GH4/5/5S

#ad
FOTGA #ad - Dp500iis follow focus is upgraded based on the previous DP500II version I follow focus. More elegent apperance, more practicable. The white mark ring is made of magnet material. It can be detached or attached very easliy and quickly on matel-made follow focus.

You can also buy additional mark ring. There is an improvement on its inner structure to reach a high level in this field, which permits much less backlash, even better than the previous DP500II follow focus and most follow focus on the market. There is also a button downside can adjust the tension of of the gearbox to reach 2 dampen level. This improved follow focus integrated with a/b hard stops which have easy begin/end setups for fast repeatable racking between two points, and make focusing lenses that have no hard stops such as Canon EF lenses much easier.

The particular part of this follow focus is it can use different size gears. It can work with 3 different size gear to meet your different need with various lens: 38T 38 teeth 08mm pitch, diameter is approx. 31mm included 65T 65 teeth 08mm pitch, diameter is approx. 28mm not included 43T 43 teeth 08mm pitch, diameter is approx.
BrandFOTGA #ad
ManufacturerFotga #ad
Part NumberDP058
ModelDP058

4. FOTGA

#ad

FOTGA DP3000 M4 DSLR Quick Release Follow Focus with A/B Stops for 15mm Rail Rod Rig System,Fits for Sony A7 A7R A7S II III GH4/5/5s,Canon 5D III IV,Nikon D90 D7100 D500

#ad
FOTGA #ad - Quick-release version, easily attached and detach. Material: Aluminum Alloy, Plastic. With a/b release locking system for A/B hard stops. Compatible with industry standard Follow Focus Whip or Crank. Improved design has dampening which gives virtually zero backlash
BrandFOTGA #ad
ManufacturerFotga #ad
Part NumberDP3004-DF
ModelDP3004

5. FOTGA

#ad

Fotga DP3000 M3 Quick Release Follow Focus for Matte Box 15mm Rail Rod Rig Nikon Canon Sony DSLR Cameras

#ad
FOTGA #ad - The white mark ring is made of magnet material. This set comes with a free flexible gear belt can be used with any zoom or prime lenses with a wide range of lens diametersany size from 46 to 110mm.

It can be detached or attached easily and quickly from the follow focus. The connection mount to the gear wheel is not only the newest version but also the last upgrade version. There is an improvement on its inner structure to reach a high level in this field, which permits much less backlasheven zero backlash, the Dampened gear box, even better than most follow focus on the market.

The gear wheel on it can be detached and installed in both sides, which makes it suitable for both left-hand and right-hand photographer. Quick-release version, easily attached and detach, Material: Aluminum Alloy, Plastic. You can also buy additional mark ring. There is a release button on the side which can easily locate the focus.
BrandFOTGA #ad
ManufacturerFotga #ad
Part NumberDP3003
ModelDP3003

6. FOTGA

#ad

Fotga DP500IIS Quick Release 15mm Rail Rod Cheese Baseplate Rig + DP3000 M1 Follow Focus for DSLR Cameras Video Camcorders

#ad
FOTGA #ad - You can mount it on tripod or quick release plate. It allows you mount it onto your stabilizer. There is also 2× 1/4"-20 screw holes on the railblock of it. This rig set is compatible with any standard 15mm rail system for your DSLR rig or cage.

This dp3000 m1 follow focusno quick release function keep the same function as DP500 series, but adopts different materials, Which is lighter than former one and is more conveint for ordinary users. Made of metal and plastic still sturdy enough for holding follow focus, etc, matte box, camera, just as FOTGA DP500II alway. The cheese bottom baseplate is with 11× 1/4"-20 screw holes and 2× 3/8"-16 screw holes. This dslr rig set includes fotga dp500iis quick release cheese baseplate DSLR rig and DP3000 M1 Follow Focus. It's only shipped to US, Not shipped to others country.
BrandFOTGA #ad
ManufacturerFOTGA #ad
Part NumberDB633-US

7. Hersmay

#ad

Fotga DSLR Swing-Away Matte Box Mattebox with 15mm Rod for Rail Rod Baseplate Rig Nikon D850 D750 Sony A9 A7III A7RIII A7SII A6000 A6300 A6500 Panasonic GH4 GH5 GH5s Canon EOS 5D 6D 7D Mark II III IV

#ad
Hersmay #ad - Universal design for all dslr cameras, video cameras, interchangeable-Lens cameras & Industry standard 15mm rod system and 19mm rod system. Donuts are slightly flexible, 76mm, and the 6 sizes range to fit almost any lens diameter. By fitting one of these rings, 88mm, light from the rear of the matte box can be blocked out, 84mm, leaving only the camera lens protruding through.

All the flags can be folded and stored for easy carrying. A set of 6 “donut” rings are included. The kit includes one foldable french flag, and two adjustable side wings. Rugged & lightweight, in the case of ensuring the overall strength and minimize the weight. Instead of moving the mounting position of the matte box, it can simply be lifted one key to undo. Size at 104mm, 98mm, 64mm. Support maximum of 14mm ultra-wide-angle lenses or large lenses up to 114mm in diameter. The excellent extinction treatment inside of the matte box, Made of all metal CNC machined except for the matte box body and filter trays, can effectively block the glare and reflected light.

Each of the three flags can be positioned and locked in place so as to suit different focal lengths by providing the maximum amount of shading without getting in the way of the shot. For changing lenses quickly, which may be blocked by other rig accessories, the unit features a swing away mechanism at a 90 degrees and one key to unlock, or require rod extensions to fit, automatic closure and allow height adjustable.
BrandHersmay #ad
ManufacturerFotga #ad
Part NumberNCMB500

8. FOTGA

#ad

FOTGA DP3000 M1 DSLR Follow Focus with Flexible Gear Belt for 15mm Rail Rod Rig for DSLR HDSLR DV 5D II III IV 6D 7D 70D 60D D7100 D500 A7 A7R A7S II III A9 GH4/5/5s

#ad
FOTGA #ad - It can be detached or attached easily and quickly from the follow focus. Material: aluminum alloy, plastic. This set comes with a free flexible gear belt can be used with any zoom or prime lenses with a wide range of lens diametersany size from 46 to 110mm.

There is an improvement on its inner structure to reach a high level in this field, which permits much less backlasheven zero backlash, the Dampened gear box, even better than most follow focus on the market. You can also buy additional mark ring. There is a release button on the side which can easily locate the focus. Another advantage of this follow focus is it can use different size gears.

It can work with 3 different size gear to meet your different need with various lens, We will ship the standard 43T. The gear wheel on it can be detached and installed in both sides, which makes it suitable for both left-hand and right-hand photographer. The white mark ring is made of magnet material. The connection mount to the gear wheel is not only the newest version but also the last upgrade version.
BrandFOTGA #ad
ManufacturerFOTGA #ad
Weight0.8 Pounds
Part NumberDP3001
ModelDP3001

9. FOTGA

#ad

Fotga DP500III 15mm Standard Rail Rod Filmmaking System Quick Release Set Up Camera Cage Follow Focus Matte Box DSLR Rig for 5DII III IV A7 A7R A7 II III D500 D850 Cameras

#ad
FOTGA #ad - The white mark ring is made of magnet material, also the gear can be installed on both side, very convenient to be detached or attached on the metal follow focus. The front matte box can be open at the position 90 degree, also the height of the mattebox is adjustable, so you can easily intsall or take off the lens or follow focus parts, or the camera, and there a 2 filter tray for 4x4 1000x1000mm filter, give a high tolorance of the installnation, 6 donuts for different lens.

You can also buy additional mark ring. It also makes focusing lenses such as Canon EF lenses that have no hard stops much easier. Express shippingthis rig set is assembled by three parts, the quick release follow focus and front mattebox and the 15mm rail rod plate, all are our DP500III series product made of sturdy metal and process by CNC mechine.

The tubes are inner screw, so you can extend the set with extra tubes. The follow focus of this rig set is quick release and a/b hard stop, with a/b hard stops, it's easy to make begin/end setups for fast repeatable shooting between two points. The rail rod plate of this rig set is transformable, so you can install the rig on the tripod or slide track, it can be installed as a shoulder pad or the C sharpe camera cage, the base of rail rod plate with the 3/8 and 1/4 screw holes, also the quick release plate is height adjustable.
BrandFOTGA #ad
ManufacturerFotga #ad
Part NumberFotga
ModelDB778