As an Amazon Associate I earn from qualifying purchases.
Adafruit #ad - Raspberry pi & Camera Board NOT included. This cable is 50mm long we have cables in 50mm, 100mm, 200mm and 300mm so you can have the perfect fit. Dimensions: 50mm x 16mm 2" x 06". Each order comes with one cable, Pi Camera not included but we have those in the shop as well.
A1 FFCs #ad - Ffc has 15 pins with a 1. 0 mm pitch. Long - these are much longer than the standard Raspberry Pi camera cables. Check my other listings for these cables in a wide variety of shorter lengths.
Adafruit #ad - This cable is 24" 610mm long. Each order comes with one cable. Raspberry pi & Camera Board NOT included. Swap out the stock 150mm long flex cable from a Raspberry Pi Camera for a shorter size.
Arducam #ad - Fresh option: the extension cable is compatible with arducam imx219 sensor drop-in replacement modules including IMX219 autofocus and IMX219 M12 lens series. Fresh design: a fresh arducam design to extend your camera vision on the Raspberry Pi Camera Module V2 – peel off the sensor from the connector on the camera board and put our cable in between.
The raspberry pi camera Module V2 is NOT included. It does not support 5MP V1 cameras or any other sensors.
Those combinations will also work with the NVIDIA Jetson Nano. Fresh view: having got rid of the restrictions caused by the camera board, you can now see in a new perspective and put the camera in a smaller enclosure and narrow space, like through a small hole or a tube.
iUniker #ad - All new version, cooler than other cable. Raspberry pi Camera and Pi board are not included. We provide 3 length in this Package: 50cm, 1 Meter, 2 Meter. Parameter - 15 pin; 1. 0mm Pitch. This ffc cable is perfectly compatible for Raspberry Pi Camera Board both 'Classic' and 'NoIR' type.
Arducam #ad - V1/v2 sizethe autofocus camera module has the same size as the pi camera V2, the package comes with plastic housing, also suitable for V1 and V2 boards. Asin: b09tsgmcm9 is a multi-camera solution that enables 4 cameras to appear in the same frame. Imx519 af camera moudlebuilt-in autofocus motor allows you to get focus quickly so that you can focus to infinity no matter where you place your camera.
The minimum focus distance is 10cm, and the longest allowed exposure time is 200 seconds. Please search asin: b09tsdz48f for the camera extension kit, which allows you to place cameras up to 15 meters away for shooting.
16mp for all pisthe raspberry pi camera features a 16mp imx519 sensor with a pixel resolution of 4656 x 3496, this camera requires some simple script configuration before use, twice as high as the v2 camera and 40% higher than the HQ camera; Compatible with any Raspberry Pi board with a MIPI/CSI interface; Unlike the native Pi camera, and does not support raspbian. Package contentsthe package includes a camera board with imx519 sensor and an autofocus lens, an fpc cable and a camera housing.
Arducam #ad - Arducam is a company dedicated to open source hardware and software, specifically for Arduino and Raspberry Pi camera solutions. 2 length for raspberry pi zero camera: 7.
3cm 15cm, one end is 15 Pin 1. 0mm pitch interface and the other end is 22 Pin 05mm interface. We also offer customized turnkey design and manufacturing solution services for customers who want their products to be unique.
1. Adafruit
#ad300mm / 12", Adafruit Flex Cable for Raspberry Pi Camera or Display
#adMore information #ad
Works great, just carefully open the connector on the Pi and slip this one in. Available in 50mm 2", 100mm 4", 200mm 8", 300mm 12" Lengths. This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera either 'classic' or 'NoIR' type for a different size.| Brand | Adafruit #ad |
| Manufacturer | Raspberry Pi #ad |
| Height | 0.5 Inches |
| Length | 2 Inches |
| Weight | 0.02 Pounds |
| Width | 1.8 Inches |
| Part Number | 1648-FBACA |
| Model | 1648-FBACA |
More information #ad
2. A1 FFCs
#adFlex Ribbon Extension Cable for Raspberry Pi Camera, A1 FFCs, Black 2m / 6.56ft Long
#adMore information #ad
Black with cable specs on one side in white and nothing on the other side. Has blue stiffeners at each end to make installation a breeze.| Brand | A1 FFCs #ad |
| Manufacturer | A1 FFCs #ad |
| Part Number | FFC-B-200cm |
| Model | NA |
| Warranty | Standard Amazon return policy |
More information #ad
3. Adafruit
#adAdafruit Flex Cable for Raspberry Pi Camera, 24" / 610mm
#adMore information #ad
| Brand | Adafruit #ad |
| Manufacturer | Adafruit #ad |
| Height | 0.79 Inches |
| Length | 3.15 Inches |
| Weight | 0.02 Pounds |
| Width | 3.15 Inches |
| Part Number | FBA_ADA1731 |
| Model | FBA_ADA1731 |
More information #ad
4. A1 FFCs
#adBlack 60cm/2ft, Flex Ribbon Extension Cable for Raspberry Pi Camera, A1 FFCs
#adA1 FFCs #ad - Same specs as factory cables in various lengths and pack sizes. Black with cable specs on one side in white and nothing on the other side.More information #ad
Has blue stiffeners at each end to make installation a breeze. Ffc has 15 pins with a 1. 0 mm pitch. Check my other listings for this cable in other lengths.| Brand | A1 FFCs #ad |
| Manufacturer | A1 FFCs #ad |
| Part Number | FFC-B-60cm |
| Model | NA |
| Warranty | Standard Amazon return policy |
More information #ad
5. A1 FFCs
#adBlack 1m/3.28ft Long, A1 FFCs, Flex Ribbon Extension Cable for Raspberry Pi Camera
#adA1 FFCs #ad - Ffc has 15 pins with a 1. 0 mm pitch. Has blue stiffeners at each end to make installation a breeze. Specs are equivalent to the factory cable. Ships in a protective tube to prevent damage. Black with cable specs on one side in white and nothing on the other side.More information #ad
| Brand | A1 FFCs #ad |
| Manufacturer | A1 FFCs #ad |
| Part Number | FFC-B-100cm |
| Model | NA |
| Warranty | Amazon A to Z Guarantee |
More information #ad
6. Arducam
#adNarrow Space Project, 300MM/1FT Cable to Extend IMX219 Sensor for Smaller Enclosure, Arducam Sensor Extension Cable for Raspberry Pi Camera Module V2, Work with V2 Camera on Jetson Nano
#adThe raspberry pi camera Module V2 is NOT included. It does not support 5MP V1 cameras or any other sensors.
More information #ad
Note: please detach and re-attach the connectors gently and carefully, otherwise you might cause damage to the connection. Fresh look: give your raspberry pi camera Module V2 a fresh look by freeing the sensor from the camera board without losing the traditional flex ribbon cable extension. Those combinations will also work with the NVIDIA Jetson Nano. Fresh view: having got rid of the restrictions caused by the camera board, you can now see in a new perspective and put the camera in a smaller enclosure and narrow space, like through a small hole or a tube.
| Brand | Arducam #ad |
| Manufacturer | Arducam #ad |
| Weight | 0.05 Pounds |
| Part Number | B0186 |
More information #ad
7. iUniker
#ad9 Pack, Raspberry Pi Camera Cable, iUniker 15 Pin Ribbon Flat Cable, Flex CSI Cable 50cm/1m/2m for Raspberry Pi 3B+, Pi Camera Flex Cable, 3B, 2B Not for Pi Zero
#adMore information #ad
| Brand | iUniker #ad |
| Manufacturer | iUniker #ad |
| Weight | 0.02 Pounds |
| Part Number | IU-RP-048 |
| Model | IU-RP-048 |
More information #ad
8. Arducam
#adArducam 16MP Autofocus Raspberry Pi Camera Module with ABS Case, IMX519 16 Megapixel High Resolution Autofocus Camera for All Raspberry Pi Models
#adThe minimum focus distance is 10cm, and the longest allowed exposure time is 200 seconds. Please search asin: b09tsdz48f for the camera extension kit, which allows you to place cameras up to 15 meters away for shooting.
More information #ad
And the housing also has an integrated tripod mounting hole, which you can install on any 1/4 hole distance tripod. Crisper images/videosthe 16 megapixel camera can capture 1080p full HD video at up to 30 frames per second and 720p HD video at up to 60 frames per second, and also provides an effective 80-degree field of view. 16mp for all pisthe raspberry pi camera features a 16mp imx519 sensor with a pixel resolution of 4656 x 3496, this camera requires some simple script configuration before use, twice as high as the v2 camera and 40% higher than the HQ camera; Compatible with any Raspberry Pi board with a MIPI/CSI interface; Unlike the native Pi camera, and does not support raspbian. Package contentsthe package includes a camera board with imx519 sensor and an autofocus lens, an fpc cable and a camera housing.
| Brand | Arducam #ad |
| Manufacturer | Arducam #ad |
| Warranty | 6 Months |
More information #ad
9. Arducam
#adArducam for Raspberry Pi Camera Ribbon Flex Extension Cable Set 7Pcs, 5.9” 7.87” 11.8” 19.69” 39.37” for Raspberry Pi, 2.87” 5.91” for Pi Zero
#ad3cm 15cm, one end is 15 Pin 1. 0mm pitch interface and the other end is 22 Pin 05mm interface. We also offer customized turnkey design and manufacturing solution services for customers who want their products to be unique.
More information #ad
Whatever for 3d printer, or other raspberry pi camera project, home security, this camera cable set can totally meet your requirement.5 length for raspberry pi camera: 15cm 20cm 30cm 50cm 100cm, both ends are 15 Pin 1. 0mm Pitch interfaces. Compatible for all raspberry Pi board, camera module and display, perfect for Octoprint 3D printing monitoring.| Brand | Arducam #ad |
| Manufacturer | Arducam #ad |
| Part Number | B0177 |
More information #ad
