Top 8 Zhiyun Crane 2 Batteries – Electronics

As an Amazon Associate I earn from qualifying purchases.

1. EVO Gimbals

#ad

EVO Gimbals IMR 26500 Li-Ion Rechargeable Batteries for EVO Rage Gen2, Zhiyun Crane Plus & Crane V2 Camera Stabilizers

#ad
EVO Gimbals #ad - Compatibility: evo rage Gen2 & EVO Rage-S gimbals. Battery chemistry: Lithium-Ion. Rechargeable: Yes. Evo gimbals 2x imr 26500 li-Ion Rechargeable Batteries -. Package Quantity: 2.
BrandEVO Gimbals #ad
ManufacturerEVO Gimbals #ad
Weight0.3 Pounds
Part NumberEVO-50625
ModelIMR 26500 Batteries

2. Kastar

#ad

Kastar Rechargeable Battery 2600mAh Replacement for Zhiyun-Tech Gimbal Crane V1 Crane V2 Crane 3S/SE Crane 3 LAB WEEBILL-S WEEBILL LAB, Moza Gimbal Air 2 Gimbal Stabilizer 3-Pack

#ad
Kastar #ad - High capacity: kastar super high capacity battery will power your gimbal for much longer. Specification: battery type: lithium-ion; Battery Voltage: 3.

7v; battery capacity: 2600mAh. Save money & time: do not spend too much time and money on frequent brands with low quality replacement. Safe to use: kastar lithium-ion battery cells meets ul1642 & ce safety standards to ensure that your battery pack will be safe to use as a replacement for your unit. Package includes: 3-Pack Batteries. Comes with built-in over-charge, over-current, over-voltage, over-discharge, and over-heating protection circuit. With our longer run time & protection features, your cycle life will also be improved because you get quality product for your camera.
BrandKastar #ad
ManufacturerKastar #ad
Height2.68 Inches
Length0.71 Inches
Weight0.23 Pounds
Width0.71 Inches
Part NumberBA-3B-GMB-C
ModelBA-3B-GMB-C

3. zhi yun

#ad

Zhiyun Crane-2 Compatible with Nikon Z6 Z7, Zhiyun Crane 2 with Servo Follow Focus 3-Axis Handheld Gimbal Stabilizer 7lb Payload Toolless Balance Adjustment for DSLR or mirrorless camera

#ad
zhi yun #ad - The crane-2 offers three levels of focus control, enabling you to fine-tune your focusing based on the lens used, and the shot itself.

Three-level follow focus control for Canon DSLRs and mirrorless cameras released after 2008, with original Canon autofocus lenses. For quick, convenient adjusting of your camera's settings, the Crane-2 provides an interface comparable to those found on most cameras. Supports dslrs, mirrorless cameras, and camcorders weighing up to 7 pounds like Canon 5D2/5D3/5D4 ect. Connect your camera with an autofocus lens to the gimbal via cable, then adjust focus using the large thumbwheel on the handgrip.
Brandzhi yun #ad
ManufacturerZhiyun #ad
Height7.87 Inches
Length7.87 Inches
Weight5.51 Pounds
Width7.87 Inches
Part NumberCrane-2 with EACHSHOT Kit
ModelCrane-2 with EACHSHOT Kit
WarrantyZhiyun Crane 2

4. ZHIYUN

#ad

Zhiyun 18650 Battery Charger Three Slots for Crane 3S/3SE and Crane 2

#ad
ZHIYUN #ad - Use for: zhiyun crane 3S, Crane 2. Original oem zhIYUN Accessories. In the box: 18650 Battery Charger x1.
BrandZHIYUN #ad
ManufacturerZhiyun #ad
Height1 Inches
Length4 Inches
Width3 Inches
Part NumberC000053
ModelPGYTECH Tello Adapter for Lego Toys

5. SMALLRIG

#ad

SMALLRIG Grip Handheld Ring for ZHIYUN Crane 3S Handheld Stabilizer, 2858

#ad
SMALLRIG #ad - The ring breaks down into multiple parts for storage and transport. For zhiyun crane 3sthe handheld ring 2858 is designed to support for Zhiyun CRANE 3S handheld gimbal stabilizer during handheld shooting. Multiple mounting pointsthe connect adapter on the ring features multiple 1/4"-20 threaded holes, or monitor mount 2294.

Serves both as stand & handgripconstructed with lightweight carbon fiber and aluminum, the handheld ring 2858 provides an alternative way of holding your gimbal and facilitates easy transfer from one operator to another. The entire unit can be disassembled for space saving and transport when not in use. The 25mm rod is compatible with rod clamp 1860 for more accessories, and a 3/8"-16 threaded hole for attaching extra accessories such as a Magic Arm 2070, such as battery plate and wireless receiver.

Quick release designthe gimbal itself slots into the ring via a quick release plate with anti-twist design. Support feet included a pair of adjustable support feet are also included for instant setting down of the ring, allowing users to rest between shots.
BrandSMALLRIG #ad
ManufacturerSMALLRIG #ad
Height6.5 Inches
Length25.57 Inches
Width22.44 Inches
Part Number2858-SR

6. zhi yun

#ad

Zhiyun Crane-2 with Extra Batteries 3-Axis Handheld DSLR Gimbal Camera Stabilizer for Sony A9 A7iii Canon 5D IV 4D, Max Payload 3.2KG OLED Display,Long Runtime, 2021 Version

#ad
zhi yun #ad - 3. 2kg/7lb payloadsupports dslrs, mirrorless cameras, and camcorders weighing up to 7 pounds like Canon 5D2/5D3/5D4 ect. Buttery smooth movementfrom basic to advanced modes, Following, Full-Range POV, Locking, are all easily accessible on CRANE 2: Pan Following, Vortex mode.

18 hour run timethree high energy efficiency 18650 rechargeable batteries give the Crane 2 maximum runtime of 18 hours with 6000mAh capacity. Oled display combined with the quick control dial on its panel, you not only can see various stabilizer status at a glance, but you can also make various camera & gimbal settings with a twist of fingers. Quick control dial either press or rotate the Dial to Make Various Camera Parameter Settings such as TV, AV, ISO, and EV.
Brandzhi yun #ad
ManufacturerZhiyun #ad
Height17.72 Inches
Length8.27 Inches
Weight2.76 Pounds
Width4.72 Inches
Part NumberZYDX0013

7. Neewer

#ad

Neewer Carbon Fiber Dual Handle Grip, Diameter Adjustable 25-45mm Compatible with Zhiyun Crane 2/Crane V2/Crane Plus/Crane/Crane M/ Feiyu G6 Plus/A1000/A2000/MOZA Air Aircross Gimbals Only Grip

#ad
Neewer #ad - Multi-choices of holding ways: provide various shooting ways including positive grip gesture and inverted grip gesture; Can realize shooting in different angles, and finish the shooting in most of circumstances.

You can hold it tightly without worrying about the falling off due to enduring application. Note:not support DJI Ronin-S. Lightweight and durable: made of carbon fiber, lightweight yet solid and durable so to safely secure gears to the gimble grip and easy to hold. Adjustable holder socket design: suitable for gimbles diameter within 098-1. 77 inch/25-45 mm, feiyu g6 plus, a2000, crane v2, crane plus, a1000, compatible with Zhiyun Crane 2, Crane M, Crane, MOZA Air Aircross and other gimbles as long as its diameter is from 25-45mm.

Non-slip design: the 2 handles are made of rubber with anti-slip design to increase friction. Multiple 1/4-inch screw holes: 1/4 inch screw threads holes on the grip enable you to connect field monitor, led light, Bluetooth remote or any other accessories to your cameras.
BrandNeewer #ad
ManufacturerNeewer #ad
Weight1.75 Pounds
Part Number10093965
Model10093965

8. zhi yun

#ad

Zhiyun 2S, Transmount Single Grip L Bracket Rig, Zhiyun Handle Grip LIte, 1/4 Screw Connector for Zhiyun Crane 2S Plus, DJI Ronin-S SC

#ad
zhi yun #ad - No worry accident caused by hand slippery. Wrist strap comfortable and anti-slip. Hold the grip tight. Suitable for zhiyun crane 2 Crane Plus Crane M Series and other Handheld Gimbal. Quality materialmini size and lightweight only 053ibs. Ease the weight of the setup. Universal compatibilitythis mini dual grip perfect Compatible with Zhiyun Crane 2S, Smooth 4, DJI Ronin S, Feiyutech Gimbal Stabilizer, . Adopts soft material brings better feelings and stable operation. Big screw base tighten it to the 1/4" threaded hole at the bottom of your gimbal.
Brandzhi yun #ad
ManufacturerZHIYUN #ad
Part NumberZHIYUN_Mini Dual Grip Lite_BR1F02