As an Amazon Associate I earn from qualifying purchases.
1. RTL-SDR Blog #ad
RTL-SDR Blog V3 R820T2 RTL2832U 1PPM TCXO HF Bias Tee SMA Software Defined Radio with Dipole Antenna Kit #adRTL-SDR Blog #ad
- Several improvements over other brands including use of the r820t2 tuner, aluminium shielded case with thermal pad for passive cooling, a 1 PPM temperature compensated oscillator TCXO, SMA F connector, improved component tolerances, activatable bias tee circuit and a much improved antenna set.
Can tune from 500 khz to 1. 7 ghz and has up to 3. 2 mhz of instantaneous bandwidth 2. 4 mhz stable. Please do not use outside during poor weather conditions. Great for many applications including general radio, air traffic control, pocsag, weather balloons, radio astronomy, ADSB, NOAA APT weather satellites, meteor scatter monitoring, DAB, public safety radio, trunked radio, APRS, P25 digital voice, ACARS, classroom learning, or for use as a low cost panadapter with a traditional ham radio.
Easy to mount outdoors and designed for portable and temporary outside usage. Please note rtl-SDR dongles are RX only. Hf reception below 24 MHz in direct sampling mode with reduced performance. Great for beginners as it allows for terrestrial and satellite reception. Comes with our portable dipole antenna kit. Includes 1x rtl-sdr blog v3 r820t2 rtl2832u 1ppm tcxo hf bias tee sMA Dongle and 1x Multipurpose Dipole Antenna Kit.
2. RTL-SDR Blog #ad
RTL-SDR Blog R820T2 RTL2832U 1PPM TCXO SMA Software Defined Radio Dongle Only #adRTL-SDR Blog #ad
- Several improvements over other brands including use of the r820t2 tuner, a 1 PPM temperature compensated oscillator TCXO, SMA F connector, aluminium shielded case with thermal pad for passive cooling, improved component tolerances, activatable bias tee circuit and a much improved antenna set.
Includes 1x rtl-sdr blog brand r820t2 rtl2832u 1ppm tcxo hf bias Tee SMA Dongle V3 Dongle Only.
Great for many applications including general radio, adsb, meteor scatter monitoring, p25 digital voice, public safety radio, DAB, classroom learning, air traffic control, ACARS, trunked radio, pocsag, radio astronomy, weather balloons, APRS, NOAA APT weather satellites, or for use as a low cost panadapter with a traditional ham radio.
Hf reception below 24 MHz in direct sampling mode with reduced performance. Can tune from 500 khz to 1. 7 ghz and has up to 3. 2 mhz of instantaneous bandwidth 2. 4 mhz stable. Please note rtl-SDR dongles are RX only.
3. NooElec #ad
NESDR SMArTee v2 Bundle, Premium RTL-SDR w/Integrated Bias Tee, Antenna Base & 3 Antennas. RTL2832U & R820T2-Based Software Defined Radio SDR, SMA Input, 0.5PPM TCXO, Aluminum Enclosure #adNooElec #ad
- Same form factor as the other devices in our nesdr smart series, even on embedded devices like the Raspberry Pi! Always-on, which means no USB occlusion issues--run devices side-by-side without messy extension cables or adapters, 4.
5v bias-tee with independent ultra-low-noise power supply and 250mA power capability allows you to power nearly any active antenna circuitry without messing around with drivers or software.
This is at least 4x more accurate than units advertised as containing 1PPM TCXOs, which have up to a +/- 2PPM initial offset. Includes sdr, and 3 antenna masts to get you started right away without any further purchases! Designed and manufactured by Nooelec in North America.
Unmatched price & performance--redesigned pcb reduces noise by an average of a full 3db! includes all the same fantastic features as the rest of the NESDR SMArt series, including an ultra-low phase noise TCXO, with a guaranteed
|Manufacturer||Nooelec Inc. #ad|
|Model||NESDR SMArTee Bundle|
4. RTL-SDR Blog #ad
RTL-SDR Blog Multipurpose Dipole Antenna Kit #adRTL-SDR Blog #ad
- Dipole set includes 1x dipole base with 60cm rg174, 1x 3m rg173 extension cable, 1x flex tripod mount, 2x 5cm to 13cm telescopic antenna, 2x 23cm to 1m telescopic antenna, 1x suction cup mount.
5. NooElec #ad
SMA Input, 0.5PPM TCXO, Aluminum Enclosure, Bias Tee, NESDR SMArTee XTR Bundle, Premium RTL-SDR w/Extended Tuning Range #adNooElec #ad
- Proudly built by nooelec in the USA and Canada! Full 2-year product warranty. Run multiple nesdr smart series devices side-by-side with any USB-compliant device, including tightly-spaced embedded devices like the Raspberry Pi.
A wide variety of improvements on other designs, ultra-low phase noise 05ppm tcxo, custom heatsink, including integrated 4. 5v 250ma bias-tee, 2 rf-suitable voltage regulators, 2 silicone pads and SMA female connector.
Frequency range can be extended down to 100kHz or lower with the Ham It Up, also available on Amazon B009LQT3G6. Premium rtl-sdr bundle includes nesdr smartee xtr in beautiful brushed aluminum enclosure, re-designed antenna base with 2m 6. 5' rg-58 feed cable, and 3 antenna masts. Sdr frequency capability approximately 65mhz-2300mhz. Designed from the ground up to reduce usb port occlusion.
|Manufacturer||Nooelec Inc. #ad|
|Model||NESDR SMArTee XTR Bundle|
6. RTL-SDR Blog #ad
ADS-B LNA High Performance Triple Filter Low NF Amplifier by RTL-SDR Blog #adRTL-SDR Blog #ad
- 27db gain with a noise Figure of ~1 dB. Requires 3. 3-5v 150ma bias tee power from an RTL-SDR V3 SDR dongle, or an external bias tee. Significantly improves adsb range and number of decodes! Unique triple filter design that ensures that the dongle and LNA will not overload from strong out of band signals.
Over 60 db's of out of band attenuation. High performance ads-b 1090 mhz lna with triple filtering.
7. IWatson Electronics #ad
All-New 1.10b 50KHz-2000MHz 2GHz Malahit DSP SDR Receiver Malachite MDR2000 Registered HAM Nice Sound with 3.5 Inch Touching LCD Screen Spectrum Analyzer #adIWatson Electronics #ad
- 3. 5 inch capacitive screen; Aluminum shell, Better RF performance. Frequency range: 50khz~250Mhz and 400Mhz~2GhzRegistered already.
Power:bulit-in battery 3600mAH, long time playing. Best customer services: if any question, send us email, we will reply within 6 hours. Demodulation mode: am, lsb, wfm, USB, NFM, CW.
8. RTL-SDR Blog #ad
PAL F RG316 20cm Pigtail Adapters Kit, UHF F, Type N F, Type F F, BNC F, RTL-SDR Blog SMA Male to SMA M #adRTL-SDR Blog #ad
- Perfect for rtl-sdr blog sma dongles. Included is a bonus sma m adapter for many common devices like upconverters which have SMA F connectors.
Sma male to various common female connectors. Be prepared to connect to almost any antenna or device. Including bnc f, type n f, type f f, UHF F and PAL F. Uses 20cm of 50 ohm RG316 cabling.
|Brand||RTL-SDR Blog #ad|
|Manufacturer||RTL-SDR Blog #ad|
9. RTL-SDR Blog #ad
RTL-SDR Blog Wideband Low Noise Amplifier Bias Tee Powered #adRTL-SDR Blog #ad
- Frequency range of 50 MHz to 4000 MHz. Gain = 18. 7 db @ 900 MHz. Bias tee powered Needs 3-5v bias tee power. Oip3 = 39. 5 dbm @ 900 mhz, p1 saturation = 22. 7 dbm @ 1960 MHz. Noise figure = 06db @ 900 mHz.
10. NooElec #ad
Ham It Up Plus, HF/MF/LF/VLF/ULF Upconverter w/TCXO #adNooElec #ad
- Includes sma to sma connector to attach the output to your radio, aluminum enclosure, tested, black, and an SMA to BNC antenna adapter. The ham it up plus is fully assembled in a custom, and ready to use.
Proudly made in the usa and Canada! Full 2 year product warranty, directly through Nooelec. A high-quality rf ulf/vlf/lf/mf/hf converter for software defined radio devices like our NESDR series RTL-SDR and the HackRF--extends your radio range down to 300Hz.
Ham it up plus has all the same fantastic features as the popular Ham It Up v1. 3, and shares an identical form factor to ensure compatibility with optional enclosures and Ham It Up addons available separately. A separate noise source circuit is included for testing and calibration of various RF devices.
|Manufacturer||Nooelec Inc. #ad|
|Model||Ham It Up Plus|