As an Amazon Associate I earn from qualifying purchases.
1. Razer #ad
Custom Fan Curve Profiles, Razer PWM PC Fan Controller: Connects Up to 8 Fans, Thin Profile, Convenient Fan Monitoring #adRazer #ad
- Connects with up to 8 fans: designed to provide voltage and PWM control for up to 8 fans, the Razer PWM Fan controller supports a diverse range of PC build requirements.
Convenient fan monitoring: Keep track and adjust fan speeds all from a single intuitive interface with the Razer Synapse software. Custom fan curve profiles: create custom fan curve profiles via Razer Synapse and have your case fans automatically adjust their speeds based on system temperature including the ability to run at zero RPM for total silence.
Thin profile: the razer pwm fan controller features a low-profile design and adhesive backing making it easy to install in tight spaces within your PC case.
|Manufacturer||Razer Inc. #ad|
|Warranty||2 year manufacturer|
2. ELECTOP #ad
Electop PC Chassis Fan Hub CPU Cooling HUB 10 Port 12V 4 Pin Fan PWM Hub Molex Controller #adELECTOP #ad
- For both 4-pin and 3-pin fans. 3pin fan can also be used, but because 3Pin has no PWM function, it is at fixed speed after inserting. Please note 4pin fan speed can be adjusted by temperature control. In the hub interfaces, the red cpu interface is the cpu fan dedicated interface with speed detection function.
You can connect to the CPU fan lead on the system board or the chassis fan lead. Expand 4-pin fan interfaces, solving the problem of lack of motherboard fan interfaces. If the chassis fan is configured in BIOS to run at 50%, you will have 10 fans at 50%.
Since the mainboard can only receive one rotation speed signal, the remaining nine conventional fan interfaces have the PWM function, but no speed signal. There is eva double-sided adhesive at the back of the hub, which can be easily affixed to a flat place.
Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis. So, then the speed is regulated by the speed for the "source" fan. Red is expected to be a pass through for the cpu fan. Designed for 12v 4-pin 3-pin fans, support simultaneous starting at most 10 channel fans. The ten fans will spin at the same speed, the hub has a power source fed from the computer power supply, that designated by the system for that fan.
3. Thermaltake #ad
Thermaltake Commander FP SATA Powered 10 Port 4-Pin PWM Fan Hub AC-023-AN1NAN-A1 #adThermaltake #ad
- Supports 10 4-pin independent fans :capable of connecting 10 PWM fans, the Commander FP enables users to optimally expand cooling capability within the chassis. Direct sata power input: powers up to 9 PWM fans simultaneously from PSU to prevent stray current when the fan hub is in use.
Blue led power Indicator. Included ties/velcro for easy placement: 5 reusable beaded cable ties, 2 velcro tabs, and one PWM signal cable that let users keep the cables neat and tidy and hold the fan hub steadily in place.
|Manufacturer||Thermaltake USA Direct #ad|
|Warranty||1 year warranty|
4. 1 one enjoy #ad
Support 10 Computer CPU Fans Splitter PWM, 1 one enjoy Thermalright PWM Fan Hub PC Case Fan Controller 4 Pin #ad1 one enjoy #ad
- Pwm function: each port has its own pwm function and the fan speed can be adjusted at the same time. Stable sata power input: simple and stable. Only one saTA connection to the system. Compact design can save space and make the wire more tidy.
Only the speed of the red port can be identified by the system. 10-port fan hub: supports 10 pwm 4 pin fans at the same time. Easy to install: double-sided adhesive for easy installation and more stable standing in the surface.
5. skineat #ad
Chassis Fan Hub CPU Cooling | 10 Port 12 V SATA to Fan-Header with 4 Pin PWM Controller | Dedicated Supply from PSU to Link Multiple Points #adskineat #ad
- Most efficient sata to fan adapter in 2019 managing multiple fans from a single case input has become easier for you now. 3 pin fans may also be used but have no PWM function and will stay at it's fixed speed after inserting. We will go an extra mile to redress the situation at hand.
If your motherboard lacks fan interfaces, use this neat & expand fan interfaces designed for 12 V 4-pin fan. Step by step set-up you will receive 1 hub & 1 pwm connector in your package. You need to connect the SATA & the 4 pin at the same time to run multiple fans. Installation & easy configuration, this fan splitter will work even if only connected to the psu with sata connector.
You then need to connect the fan hub’s PWM cable to the motherboard. Please note 4 pin fan speed can be adjusted by temperature control as well. We have a track record of ensuring happiness of clients and are absolutely confident that our product will exceed your expectations.
Just in case the product falls short of your expectations in any manner, you can return it for a 100% refund. Connect 1 fan to the red port on fan hub then connect remaining fans. The other 9 black fan ports can NOT be adjusted in speed and will copy the power level of what the red port is at. Pwm fan controller temperature control the cpu port red port, would be the only port that can be controlled by the operating system.
6. upHere #ad
UpHere 7-Port 4PIN SATA PWM 5V 3PIN ADDRESSABLE RGB Fan Hub/Splitter for 4-Pin & 3-Pin Case Fans in Black-P7PRGB #adupHere #ad
- Each port has its own PWM function and the fan speed can be adjustedat the same time. 03. Capable of connecting to 7 pc fans simultaneously for cooling the computer system. 05. Easy and quick installation with a compact Design, upHere P7P Fan hub allows you to easily attach on the back of the PC case using pre-installed double-sided tape.
The fan hub draw the pwm signal from motherboard and feedback fan speed to the motherboard and draw an ARGB signal from this cable only the speed of Fan 1 can be identified by the system.
02. Uphere p7p fan hub provides individually addressable rgb lighting with software control for unique lighting effects and colors.
5v argb header compatible with asus aura, asRock RGB, GIGABYTE and MSI RGB. 04. Powered by system psu sata connection to ensure 12V stable power for up to 7 fans. 01. Uphere argb pwm fan hub - supports up to 7 fans （3pin/pwm 4pin/5v 3pin argb）, occupying only one 4-pin M/B FAN Header System Fan or CPU Fanand One 5V 3-pin ARGB Header.
7. skineat #ad
Skineat Chassis Fan Hub CPU Cooling | 10 Port 12 V SATA to Fan-Header with 4 Pin PWM Controller | Dedicated Supply from PSU to Link Multiple Points 2pack #adskineat #ad
- Connect the power supply SATA cable to fan hub before you attach/stick it on the chassis. If your motherboard lacks fan interfaces, use this neat & expand fan interfaces designed for 12 V 4-pin fan. Pwm fan controller temperature control the cpu port red port, would be the only port that can be controlled by the operating system.
The other 9 black fan ports can NOT be adjusted in speed and will copy the power level of what the red port is at. This pwm hub sata accurately controls fan speed, you can slow down & tidy way to add fans & speed up the fans up to the maximum speed.
Connect 1 fan to the red port on fan hub then connect remaining fans. We have a track record of ensuring happiness of clients and are absolutely confident that our product will exceed your expectations. The pwm interface is connected to cpu fan interface on motherboard by PWM cable & the red interface is dedicated for CPU fan.
Please note 4 pin fan speed can be adjusted by temperature control as well. Money back product warranty our product is backed up by manufacturer’s warranty so feel free to contact us for any query or information. You then need to connect the fan hub’s PWM cable to the motherboard. You just plug the board into the CPU fan motherboard connection & then SATA for power. It has eva double-sided adhesive tape at the back of the hub to mount to the case or any flat place.
8. GELRHONR #ad
Chassis Fan Hub, SATA 1 to 8 Way12V 3 PIN Cooling Fan Splitter Controller Hub 3 Pin PWM for PC Desktop Computer Motherboard12V 3-Pin #adGELRHONR #ad
- Easy installation:it is very easy to setup. It can be used to fix the hub in the chassis. Suit for 12v 3pin fan 8 channels. Using sata interface. Support the fan operation at the same time, solve the lack of motherboard interface, and focus on processing the fan wire.
Sata cooling fan splitter suit for 12v 3pin fan 8 channels. Using sATA interface. Support the fan operation at the same time, solve the lack of motherboard interface, and focus on processing the fan wire.
Built-in double-sided adhesive: this compact HUB easily fits inside your pc case. 8 way without speed measurement and pwm function, you can manually adjust the gear position, start the fan at full speed LOW or low speed LOW, or turn off the fan.
Connect your rgb items to the hub, connect the included cable to any pin on the hub then connect the other end to any RGB header on your motherboard and lastly connect a SATA cable from your PSU to the hub to provide power.
9. SinLoon #ad
SinLoon PC 8 Channels Fan Hub Knob Cooling Fan Speed Controller for CPU Case HDD VGA PWM Fan PCI Bracket 12V Fan Control- SATA Interface Power Supply SATA 1Knob #adSinLoon #ad
- Material knob cooling fan speed Controller adopts plastic and metal materials, reliable, durable, with low loss and low heat. Functionpc 8 channels fan hub reduce speed to reduce noise & power consumption when computer parts are free.
Save spacesinloon pc 8 channels fan hub the governor is installed in the PCI position of the chassis, which is convenient for installation and does not take up space. Universalwidely used for pc computer water cooling system, easy to install.
Fan interface: 4piN 3PIN Can be connected. Power supply Interface: SATA interface. Knob adjusthigh accuracy and good performance, equipped with an independent speed controller and the speed can be adjusted at will. Adjustment method: 1 Manual Adjustment Knob. Increase speed to reduce computer part temperature when computer parts are busy.
10. Foyozisun #ad
PWM Fan PC Hub, 8 Port 4-pin pwm Fan Controller with Speed Control Function PSU Splitter 2 #adFoyozisun #ad
- Easy to use: no drive, plug-and-play. Can be directly supplied by 12V power, which can reduce the load pressure of the mainboard.
1 to 8 pwm fan hub: pc fan controller can be connected to 8pcs 3pin/4pin fans to solve the shortage of mainboard interface. Save space: the rotary switch with 20cm cable can be installed in any position of the PC case.
With sided tape, can fix the governor firmly inside the chassis. Pc fan controller:with speed control function can also be used as a fan hub conrtoller. The speed can be adjusted at will. Note:if your fan is a 3-pin fan, you can also plug in, but can not achieve PWM control speed! .