Top 10 PCI SATA Card – Computer Internal SCSI Port Cards

As an Amazon Associate I earn from qualifying purchases.

1. Ziyituod

#ad

Marvell 9215 Non-Raid, 4 Port with 4 SATA Cable, Ziyituod PCIe SATA Card, Support 4 SATA 3.0 DevicesZYT-SA3014, Boot as System Disk, SATA Controller Expansion Card with Low Profile Bracket

#ad
Ziyituod #ad - You could make the system to boot from this sata controller but non RAID. If your motherboard has raid function, you could make a RAID with this SATA Card.

Chipset - with using the marvell 88se9215 chip, more stable and compatible. Port multiplier FIS-based and Command-based switching supported. 4 ports adapter card - you could add 4 6gb/s SATA 3. 0 devices to your computer with this PCIe SATA card. Compatible with windows xp / 10 / linux os / nas / 7 / MAC / 8 / Driver: http://www. Ziyituod. Net/ProDetail. Aspx?proId=110 For all pcs - with a low profile bracket and 4 SATA Cable,compatible with 99% size chassis on the market. System support - connect 4 large capacity storage devices at the same time.
BrandZiyituod #ad
ManufacturerZiyituod #ad
Weight0.22 Pounds
Part NumberZYT-SA3014
ModelZYT-SA3014

2. GODSHARK

#ad

GODSHARK 4 Ports PCI SATA Raid Controller Internal Expansion Card with 2 Sata Cables, PCI to SATA Adapter Converter for Desktop PC Support HDD SSD

#ad
GODSHARK #ad - Add four independent sata-i ports to your pci equipped computer and enjoy the benefits of the optional software RAID configuration for added speed and/or data security with this adapter card.

Note it is pci card, NOT PCIE card. The card comes with an optional raid utility which lets you configure a RAID 0 RAID 1 or RAID 0+1 setup on two or more of the SATA ports. Sil3114 chipset and supports two modes: 32-bit at66MHZ and 64-bit at 133MHZ. You can have one raid 0 or 1 setup and two independent SATA drives two RAID 0 or 1 sets or a single RAID 0+1 set. Plug the sata raid pci card into the pci slot on your motherboard, and connect SATA devices to the ports on the PCI card using the cables provided, or standard SATA cables of adequate length.
BrandGODSHARK #ad
ManufacturerGODSHARK #ad
Part NumberPTOS-4P

3. Ziyituod

#ad

Ziyituod SATA Card, 6 Gbps SATA Controller with Low Profile Bracket, Boot as System Disk, Support 6 SATA 3.0 DevicesZYT-SA3006, Non-Raid, 6 Port with 6 SATA Cable

#ad
Ziyituod #ad - Chipset - with using the chip aSM 1062+1093*2, more stable and compatible. System support -- compatible with windows xp / mac / 10 / 8 / 7 / nas os. Note:compatibility issue is not a quality issue.

6 ports adapter card - you could add 6 6gb/s sata 3. 0 devices to your computer with this PCIe SATA card. Up to 520mb/s per port under PCIe 2. 0 condition. Quality assurance - 30 days money back guarantee, 1 year warranty, lifetime tech-support. Get support Email:[email protected] Com / driver: http://www. Ziyituod. Net/ProDetail. Aspx?proId=112. It is incompatible with some computers and cannot be used normally after purchase. Thank you for your understand!!! You can apply for a return or exchange. Non-raid - you could make the system to boot from this sata controller but non RAID. If your motherboard has raid function, you could make a RAID with this SATA Card.
BrandZiyituod #ad
ManufacturerZiyituod #ad
Weight0.33 Pounds
Part NumberZYT-SA3006
ModelZYT-SA3006

4. JESOT

#ad

JESOT SATA Card 4 Port with 4 SATA Cables, 6 Gbps SATA 3.0 Controller PCI Express Expression Card with Low Profile Bracket Support 4 SATA 3.0 Devices

#ad
JESOT #ad - High performance - the 4 port sata controller based on Marvell 88SE9215 chip, more stable and wider compatible. But if your motherboard has raid function, you could make a RAID with this SATA card.

Fit for pcie x1/ x4/ x8/ X16 slot. Efficient - you could add four 6gbps/s sata 3. 0 devices to your computer with the PCIe SATA card and 4 SATA cables. Please note - you could make the system to boot from this sata card but non RAID. For all pcs - our pcie to sata iii 4 port expansion card comes with a low profile bracket and 4 SATA cables, compatible with most chassis on the market. Port multiplier FIS-based and Command-based switching supported. Backward compatible to 1. 5 gbps/s and 3 Gbps/s. Support system - the sata expansion card supports windows xp/ 7/ 8/ 10/ Mac/ NAS/ Linux OS, no driver required. Support install Windows OS from Win10 PE.
BrandJESOT #ad
ManufacturerJESOT #ad
Part NumberSATA CARD-01

5. MZHOU

#ad

Built-in Adapter Converter for Desktop PC, MZHOU PCIe SATA Card 8 Port, 6Gbps SATA 3.0 PCIe Card,Support 8 SATA 3.0 Devices, with 8 SATA Cables and Low Profile Bracket

#ad
MZHOU #ad - It is an expansion card that cannot support third-party chips. Connect 8 mass storage devices at the same time. The raid in intel is only for original SATA. Note: the 8-port does not support raid. With this pcie sata card, you can add eight SATA 3. 0 6 gbps devices to your computer two of the satellites require a driver. With windows xp / mac / 7/8/10 / NAS / Ubuntu. The pcie sata card contains eight sata cables to simplify the connection! Use the marvell 88se9215 + jmicron JMB5xx chip to improve card stability and compatibility.
BrandMZHOU #ad
ManufacturerMZHOU #ad
Part NumberMzhou-8 port

6. IO CREST

#ad

I/O Crest 4 Port SATA III PCI-e 2.0 x1 Controller Card Marvell 9215 Non-Raid with Low Profile Bracket SI-PEX40064

#ad
IO CREST #ad - Compliant with Serial ATA Specification 3. 0 Hot plug and Hot Swap. Supports communication speeds of 6. 0 gbps, 3. 0 gbps, and 1. 5 gbps. 4 internal sata 6Gb/s Ports. Compatible with sata 6g, 3G and 1. 5g hard Drives. Chipset: marvell 88SE9215. Pci-express x1 interface is compatible with PCI-Express x2, x8, x4, and x16 slots. We recommend a fresh Windows install with this card. Compliant with pci-express Specification v1. 0 and backwards compatible with PCIex1. Drivers are required for this card to function.
BrandIO CREST #ad
ManufacturerIO Crest #ad
Height1.5 Inches
Length7 Inches
Weight0.2 Pounds
Width5.5 Inches
Part NumberSI-PEX40064
ModelSI-PEX40064
WarrantyOne year warranty

7. MHQJRH

#ad

MHQJRH PCI Express SATA 3.0 Controller Card, PCI-E to SATA 3.0 Disk Array Card,with Small Bracket and 2 SATA Cable Support SSD and HDD, 2-Port PCIe to SATA III 6GB / s Built-in Adapter Converter

#ad
MHQJRH #ad - Built in 2 sata3. 0 interfaces, supports sata rev 3. 0 transfer speeds up to 6. 0gbps and backwards compatible with SATA I/II at 1. 5/3. 0gbps. Pcie to sata 3. 0 2 port expansion card with a low profile Bracket and 2 SATA Cable. Connect 2 mass storage devices at the same time. Support ide or AHCI programming interface. Compatible with windows xp/server 2003/Vista/7/832/64 bit/10/MAC/Linux OS. Compliant with serial sata version 3. 0; compliant with PCI-E 2. 0 specification.
BrandMHQJRH #ad
ManufacturerMHQJRH #ad
Height1.2 Inches
Length7.3 Inches
Width4.3 Inches
Part Number8541586953
Model8541586953

8. SupaHub

#ad

SupaHub 8 Ports PCIe SATA Card, Boot as System Disk, Includes 8 SATA Cables and 2 SATA Power Splitter Cables, PCIe x1 Non Raid Controller Card for SATA III 6G Hard Drives

#ad
SupaHub #ad - Your system could be boot from this sata card but with Non RAID. Compatible with windows xp / 8 / nas / 10 / 7 / MAC / Linux OS. Package includes 1 x pcie x1 to 8 sata 3.

0 ports controller card, 1x low profile bracket, 8x SATA cables, 2x SATA power splitter cable, 1x CD driver. With this pcie sata card, you are able to expand 8 sata iii 6Gb/s ssd or optical drives for your desktop. In particular, 8 large capacity storage devices can be connected at the same time. Due to the marvell 88se9215 chip, the stability and compatibility of this PCIe SATA card has been greatly improved. You are able to make a raid with this SATA card if your motherboard has RAID function.
BrandSupaHub #ad
ManufacturerSupaHub #ad
Part NumberSG-CONTROLLERCARD-8PORTS

9. Rivo

#ad

Boot as System Disk, Rivo PCIe SATA Card, Support 8 SATA 3.0 DevicesSA3014, SATA Controller Expansion Card with Low Profile Bracket, 8 Port with 8 SATA Cable, Marvell 9215 Non-Raid

#ad
Rivo #ad - System support - connect 8 large capacity storage devices at the same time. But if your motherboard has raID function, you could make a RAID with this SATA card.

Chipset - with using the chip 88se9215+JMB583, improve this card more stable and compatible. For all pcs - pcie to sata 3. 0 8 port expansion card with a low profile Bracket and 6 SATA Cables,compatible with 99% size chassis on the market. Compatible with windows xp / nas / 8 / MAC / 7 / 10 / Linux OS. No driver required. 8 ports adapter card - you could add 8 6gb/s SATA 3. 0 devices to your computer with this PCIe SATA card. Please go to the ssd's website and find and install the NVMe driver for Windows/Linux OS if no drives appear in the Device/Disk manage. You could make the system to boot from this sata card but non RAID.
BrandRivo #ad
ManufacturerR_M #ad
Part NumberR_M_Sata 8P_D+S

10. Padarsey

#ad

Padarsey 4 Ports PCI SATA Raid Controller Internal Expansion Card with 2 Sata Cables, PCI to SATA Adapter Converter for Desktop PC Support HDD SSD

#ad
Padarsey #ad - The card comes with an optional raid utility which lets you configure a RAID 0 RAID 1 or RAID 0+1 setup on two or more of the SATA ports. Add four independent sata-i ports to your pci equipped computer and enjoy the benefits of the optional software RAID configuration for added speed and/or data security with this adapter card.

Note it is pci card, NOT PCIE card. You can have one raid 0 or 1 setup and two independent SATA drives two RAID 0 or 1 sets or a single RAID 0+1 set. Plug the sata raid pci card into the pci slot on your motherboard, and connect SATA devices to the ports on the PCI card using the cables provided, or standard SATA cables of adequate length. Sil3114 chipset and supports two modes: 32-bit at66MHZ and 64-bit at 133MHZ.
BrandPadarsey #ad
ManufacturerPadarsey #ad
Part NumberP-3114
Model8541586963