Top 10 IR Receiver for AV Receiver – DVI-HDMI Adapters

As an Amazon Associate I earn from qualifying purchases.

1. v AV Access

#ad

HDMI Over IP Extender Receiver [email protected] & IR Extension 1-to-1 up to 395ft /120m or 1-to-Many HDMI Over Cat5e/Cat6 Ethernet Adapter Balun, Plug & Play Without Configuration, H.265, Receiver Only.

#ad
v AV Access #ad - 24/7 customer service, just contact us by seller page whenever you needAV Access. Plug and playwork with almost any ethernet switch with NONE configuration required. One to many hdmi splitterdirect cable connection or one-to-multiple displays through most network routers or switch.

H. 265 & local loop-outwith h. 265 protocol allows user to have better picture with less bandwidth. Build-in superior Surge/ ESD protection. Bulid-in safety with trouble-free services sturdy metal enclosure provides durability and minimizes EMI/RFI noise interference. Watch video anywhere. You can connect up to 10 receivers per Transmitter to not only extend but split HDMI signals to multiple displays to create a scalable HDMI extender splitter. The extender will send back the IR signal so you can control source device at receiver’s end.

Combinations:1 one transmitter to one receiver, 2 one transmitter to many receivers ≤10 A hdmi loop-out for local display, allows you to enjoy same show in transmitter side. Note: this link for receivers only, for full set, please search ASINB096S4XC4S or contact seller for more details. [email protected] receiver for hdip120 supports up to [email protected] point to point within 394ft/120m or up to 10 receivers transmitted from source.
Brandv AV Access #ad
ManufacturerAV Access #ad

2. PAKITE

#ad

Support 1080P 60Hz Full HD with IR Remote Control, 656FT Transmission for Projector Monitor Church Office Home, 5GHz HDMI Loop Output Transmitter and Receiver for TV/AV, Wireless HDMI Extender

#ad
PAKITE #ad - Support many hdmi devicespakite wireless video transmitter and receiver can work with most hdmi equipped devices, directv, Vudu, BT Sport, DVD, Netflix, Sky Go, cable/satellite boxes, Movistar, Comcast TV, set-top boxes, hulu, xfinity, computer systems and more. Meanwhile, no software or wifi connection required. On the other hand, the delay time between wireless transmitter and receiver is less than 200ms, but the loop-out has zero latency and can use for a local display.

Can through wall & 656ft long distance wireless transmitwe set up the external dual antenna and get the long transmitter distance that reaches 656 ft/200 metersline of sight in an open field and if through walls ​the signal can transmit 15-20m/49ft-65ft. Plug&play&easy to seteasy to install, true plug and play set up eliminates the need to install expensive and inconvenient cables. Note: one transmitter could only support one receiver, DVR, CCTV Blu-ray players, IPTV, including Prime Video, but you can use more than 1 pair in the same space.

We have added two buttons so you can switch high-low rate or multi-channel with ease. Note: do not install multiple kits in the same location as it may cause signal interference. Besides, with strong anti-interference, faster transmission speed by 5g wireless dual antenna signal, 5G High-Speed Wireless TransmissionPAKITE HDMI wireless transmitter and receiver input/output resolution supports 480P, 720P, you can enjoy superior video audio quality at home or office. Built-in ir remote controlwith built-in ir signal extension, you can control the source device at the receiver and it supports 30HZ IR transmission.
BrandPAKITE #ad
ManufacturerPAKITE #ad
Height5.91 Inches
Length6.3 Inches
Weight1.98 Pounds
Width5.43 Inches
Part NumberPK-590
Modelpat-590

3. Sewell

#ad

Remote Control Extender Kit IR Emitter and Receiver, Sewell Direct BlastIR Wireless Pro IR Repeater

#ad
Sewell #ad - 10-channel system that gives you the ability to interact with your devices without needing to worry about your Wireless Extenders interfering with one another. Included usb and ac power cables, extra IR cables, mounting adhesive, and rubber feet. Note some devices us rf instead of ir for remote control. Blu-ray players, cable and dvr boxes, aV Receivers, Logitech Harmony Devices, Anything else that uses an IR signal!. Known compatibility issues with: Yamaha HTR 6140 and Arris DCX 3520E-M. Control any ir device from a distance. The blast ir wireless Pro only works with IR devices.
BrandSewell #ad
ManufacturerSewell #ad
Height2.45 Inches
Length4.5 Inches
Weight0.5 pounds
Width4.5 Inches
Part NumberSW-32988
ModelSW-32988

4. uxcell

#ad

Uxcell IR Infrared Receiver Extender Cable 2.5mm Jack 1.5m/4.9FT Long 26-39FT Receiving Distance CHD11 Black Head 5pcs

#ad
uxcell #ad - Works with all 38-56khz IR remote control and devices with an IR input port. Wide voltage adaptation, tiny, low power consumption, high sensitivity, excellent anti-interference characteristics, elegant stick-on design.

Resistant to ambient light effects. Wide angle, strong signal, long distance. Widely used in set-top boxes, household appliances, LED light bar controllers, digital photo frames, driving recorders, car speakers, and other various products to assist in extending remote control reception. Note: please confirm whether the electrical equipment has an infrared interface and confirm the size of the infrared interface. Stick the infrared received head to the side of the IR sensor, do not cover it, otherwise, the remote control will be insensitive. Product: ir receiver cable; jack: 2. 5mm; total length: 1. 5meters/4. 9feet; receiving distance: 8-12m/26-39feet.
Branduxcell #ad
Manufactureruxcell #ad
Height0.79 Inches
Length5.12 Inches
Width1.97 Inches
Part Numbera18042400ux0483
Modela18042400ux0483

5. Optimal Shop

#ad

Optimal Shop New 2.4GHz/5.8GHz RCA AV Sender Receiver Video Wireless Transmitter Cordless IR Remote Signal

#ad
Optimal Shop #ad - Use 2. 4ghz ism frequency band, multiple selective channels supported for anti-interference from wireless. The transmitter and the receiver are used in the same channel in a pair and can be used in the modes of point-to-multipoint or multipoint-to-multipoint.

There is no need to install software. Wireless transmitter distance ≤20m in obstructive place such as living rooms that are walled off by 1 wall. This wireless sharing device would be the best choice for you. Fully hardware-designed. If you have 4 televisions that require video sharing for three of these televisions, telecommunications IPTV, the installation of satellite receivers, you can do this by simply purchasing two "digital TV set-top box wireless sharing" receivers. It is usually used in wide-open area, not only used in TV BOX or DVD remote operation, but to control TV BOX or DVD remotely via receiver.

Plug and play. Simple and convenient. If you want to watch dvd, dvr, iptv, satellite stb in different tvs, but do not want to use the long and expensive cables for the devices. It can support ir remote control at the receiver end to realize the function of wireless control of devices from another place. Supports video transmission of PAL/NTSC system and stereo audio transmission.
BrandOptimal Shop #ad
ManufacturerOptimal Shop #ad
Weight1.26 Pounds

6. LINGLING ONE

#ad

Herfair IR Receiver Cable -10FT Infrared Remote Control Extender Repeater Cable with 3.5mm Jack Plug for HD DVR Cisco Explorer Verizon FiOS and Other STB Set Top Boxes, 2 Pack

#ad
LINGLING ONE #ad - From behind thecabinet, closet or even the other room. 10ft cable – 10 feet longcable with 3. 5mm plug allows you to extend the signal receiver to a suitable position. If for any reason, you are not 100% satisfied with the product, and we will refund your money! DON’T CHECK THE NEXT LISTING! JUST ORDER NOW!!! Clean look:our ir repeater system is ideal for those who want to conceal their A/V component equipment inside a closet or cabinet for a clean, stylish look.

Flexible+ risk-free purchase–you can now control your home theater, cable boxes, you can send it back to us, etc. Universal compatibility – suitable for a broad range of 38-56khzinfrared devices with an IR input port and remote control such as AV equipment and cable STB boxes. Plug and play–our ir extender cable is easy to install and use. Just plug the 3. 5mm jack into an IR input port of the device.
BrandLINGLING ONE #ad
ManufacturerLINGLING ONE #ad
Part Number4330159604
Model4330159604

7. Inteset

#ad

Long Range, Ten Channel, Inteset InfraredIR Wireless Pro, Bi-Directional, IR Receiver/Transmitter & Repeater Using Radio Frequency RF for Cable & Satellite Boxes as Well as Most Other A/V Devices

#ad
Inteset #ad - Bi-directional, full band ir control-both units send and receive IR Units are interchangeable. Many other products on the market are not licensed. Unit dimensions 2" x 1. 25" x 05".

Compatible with inteset model int-3856-wrls single channel wireless Units when in Channel 0 Ir repeater and an ir Extender-Single unit can be used as a Repeater. No direct line-of-sight needed. Not for use with RF Remotes. Works great with the inteset int422-3 remote. One year warranty. Use as many a 10 different device groups without interference in the same building. Weight is 1 oz. Compliant and licensed with CE, FCC, EMC. Some walls may reduce distance. Automatic channel pairing-Allows multiple Units to be used in close proximity w/o interference. Range between ir units up to 300 feet in open space. Ir frequencies: 20-60 khz-covers virtually all standard A/V devices.
BrandInteset #ad
ManufacturerInteset Technologies #ad
Height0.5 Inches
Length3 Inches
Weight0.45 Pounds
Width1 Inches
Part NumberINT-BIDI-WRLS
ModelINT-BIDI-WRLS

8. AV Access

#ad

IR Emitter IR Receiver Cable IR Extension Repeater for AV Access HDBT Extender 70m 100m

#ad
AV Access #ad - Easy-to-reach friendly customer service AV Access. Ir emitter + ir receiver cable is accessories for AV Access HDBT Extender 70m / 100m. Ir receiver is 1. 2m wire with self-adhesive pad, easy to realize IR remote signal extension and control.
BrandAV Access #ad
ManufacturerAV Access #ad
Height0.58 Inches
Length5.18 Inches
Width1.9 Inches
Part NumberIR-ENR
ModelIR-ENR

9. MYPIN

#ad

3ft 20KHz, 60KHz Universal IR Blaster and Receiver Cable kit, DVD Player, Blu-ray Player etc., 3.5mm Jack Cable Compatible with DVR HDMI Extender

#ad
MYPIN #ad - High sensitivity sensor-- easily control DVD player or other HDMI source from remote position up to 10 ft3m. Plug and play-- comes with adhesive backing sticks directly onto different devices, applied to HDMI Extender; IR blaster plugs directly into the IR out port of HDMI Extender, IR receiver directly into the IR in port of HDMI Extender.

Great compatibility-- with 3. 5 mm jack connector, stereo receiver, satellite tv receiver, the universal ir cable is supportive for most of audio/video devices such as HDMI Extender, dvd player, cd player, amplifier, cable box, Blu-ray player or any other components which is controlled by IR signalNOTE: Please stick the IR Emitters on the IR interface of devices you want to control remotely.22

20-60khz range-- wider frequency range than the similar infrared receiver cable in the market, which make the cable stronger and provide you better experience. Passes ir communication-- used with an ir repeater kit to control a device by the existing IR controller, control the IR devices between two rooms such as adjusting the volume or changing TV Channels.
BrandMYPIN #ad
ManufacturerMYPIN #ad
Part NumberMYPIN

10. measy

#ad

AV550 Wireless 5.8GHz 8 Channel TV Audio Video AV Transmitter Sender and Receiver with IR Remote 500m/1630FT Long Range AV550

#ad
measy #ad - This wireless sharing device would be the best choice for you. Fully hardware-designed. If you want to watch dvd, dvr, iptv, satellite stb in different tvs, but do not want to use the long and expensive cables for the devices.

Long rang wireless transmission 500m/1630ft in unobstructed Place. Or suitable for one-floor with 1-2 walls. Images received by means of radio are vivid and stable, the color is flamboyant, and the sound is clear. Supports video transmission of PAL/NTSC system and stereo audio transmission. There is no need to install software. Use 5. 8ghz ism frequency band, multiple selective channels supported for anti-interference from wireless.

The transmitter and the receiver are used in the same channel in a pair and can be used in the modes of point-to-multipoint or multipoint-to-multipoint. Simple and convenient. Plug and play. Support 8 groups of channels. You can select these channels to avoid interference from signals of a wireless router. Support 1 group of AV input signal.
Brandmeasy #ad
Manufacturermeasy #ad
Height1.06 Inches
Length3.94 Inches
Weight1.54 Pounds
Width3.43 Inches