As an Amazon Associate I earn from qualifying purchases.

65-watt power rating: amplify your sound with clarity with this heavy duty PA speaker system. It features 8 ohms impedance & 101bd output, making it ideal for outdoor & indoor spaces. The power horn only weighs 2. 75 lbs & measures 8" H x 4.


The speaker comes with two electrical wires to be connected to a siren controller system. High quality - equipped with corrosion-resistant heavy duty aluminum body with Black Finish and an impressive IP66 waterproof rating.
Compatible with - capable with any 100 - 200 watt siren system. This ultra-thin speaker has a sound compression level of 125-135dB, Impedance: 8 Ohms and a frequency range of 400-4000Hz. Super loud - just because it is small does not mean it is weak. Note: the speaker cannot be connected to the power supply alone, and must be used in conjunction with the siren system.


700 watt power: this high powered audio projection tweeter system has a maximum power output of 700-watt peak power / 350 watt RMS so you can play your favorite tracks as loud as you want and with style.
Easy to install to your vehicle’s sound system w/ 3” mounting depth. 2” kapton voice coil: pyle pro follows the standard size for most car stereo systems and created this 2 inches super titanium car audio tweeter speaker with 2” high-temperature Kapton voice coil. 2khz - 25 khz frequency response: this car tweeter speaker has a frequency response of 2kHz - 25 kHz that will complete your current car woofer enclosure system for full-range stereo sound reproduction.

Output details: frequency response: 1k-20khZ; Sensitivity: 110dB ± 2Db; Impedance: 8 OHMS. Sizing: throat size: 1. 375 inches; mounting depth: 2. 875 inches 72 millimeters; Dimensions L x W x H: 4.

Loud and clear sound: this compact mono trumpet speaker is a perfect tool if you want to make your voice audio or music louder. Wiring included: a 10-inch pre-wired cord with 3. 5mm mono connector is included to make installation easier.
Easily mount on the roof or under the car hood. Great frequency response: efficient enough to achieve your desired response, this 5” power horn speaker can amplify up to 450~5, 000hz. For easy maneuverability, the 5-inch ABS horn is equipped with a 180 degree swiveling adjustable mounting brackets. The power horn only weighs 093 lbs.

High-frequency range of 3, 000-20, 000 hz recommended power range: 15 - 100 watts RMS Per Channel High-Efficiency Bullet Tweeter Improves Treble Response Loaded Tweeter Acts Like A Piston To Pump Air.

1. PRV AUDIO
#ad
PRV AUDIO WGP275Ph 1” Exit Phenolic Driver Horn, 200 Watts Program Power Horn Driver, 100 Watts RMS Power, Midrange Vocal Reproduction Low Distortion Compression Driver and Horn Combo
#adPRV AUDIO #ad - Built to last with its phenolic diaphragm and copper voice coil, that are designed to reproduce the all-important vocal range with authority! Throat diameter: 1″.More information #ad
Nominal impedance: 8 Ohms. Type: Combo. New addition to the 1” exit phenolic family, the WG275Ph combo is all about Mid Range vocal reproduction at low distortion.Brand | PRV AUDIO #ad |
Manufacturer | PRV Audio #ad |
Height | 6.53 Inches |
Length | 6.14 Inches |
Weight | 2.24 Pounds |
Width | 6.14 Inches |
Part Number | WGP275Ph |
Model | WGP275PH |
More information #ad
2. Pyle
#ad
Pyle PHSP5, White, 8” Portable PA Speaker with 8 Ohms Impedance & 65 Watts Peak Power, Indoor/Outdoor PA Horn Speaker, Mounting Bracket & Hardware Included
#adPyle #ad - Mounting bracket included: mounting bracket & hardware are included to make installation easier. Clear & loud sound: this heavy duty pa speaker is a perfect tool if you want to make your voice or music louder.65-watt power rating: amplify your sound with clarity with this heavy duty PA speaker system. It features 8 ohms impedance & 101bd output, making it ideal for outdoor & indoor spaces. The power horn only weighs 2. 75 lbs & measures 8" H x 4.
More information #ad
5" w x 9'' D. For easy maneuverability, the 8-inch ABS horn is equipped with a 180 degree swiveling adjustable bracket. Great frequency response: efficient enough to achieve your desired response, this 8” power horn can amplify up to 500 Hz - 5 KHz. It produces powerful 65 watt sound which is enough to achieve your desired loudness. Adjustable bracket: the horn speaker can be bent & adjusted.Brand | Pyle #ad |
Manufacturer | Sound Around Inc. #ad |
Height | 8.32 Inches |
Length | 9.45 Inches |
Weight | 1 Pounds |
Width | 5.73 Inches |
Part Number | PHSP5 |
Model | PHSP5 |
Warranty | 90 DAYS |
More information #ad
3. Nippon America
#ad
2 PACK PA Power Horn Speaker 100W Indoor Outdoor 100 Watt NIPPON AMERICA
#adNippon America #ad - Nominal imp. 8 ohms freq. 100 watt indoor/outdoor power Horn; Dimensions: 11" x 6. 5". 2 pack deal. Resp. 350hz~9kHz. 80 ohms 100 watt Tc-55. Dispersion: 90° x 20° 2KHz.More information #ad
Brand | Nippon America #ad |
Manufacturer | Nippon America #ad |
Height | 10 Inches |
Length | 15.5 Inches |
Weight | 8.5 Pounds |
Width | 13 Inches |
Part Number | TC-55 x 2 |
Model | 4331030878 |
More information #ad
4. BooYu
#ad
Engineer Vehicles, Fire, BooYu 200W Compact High-Performance PA Siren Horn Speaker Ultra Slim 8 Ohms 125-135 dB IP66 Waterproof Capable with Any 100-200 Watt Siren for Police Car, Ambulance
#adBooYu #ad - Compact design fits behind vehicle's grille or push bumper. Universal siren compatibility - this compact speaker is the perfect choice for vehicles of all sizes, ATVs, compacts, engineer, fire, sedans, including trucks, private vehicles, ambulance, SUVs, UTVs and Police, etc.The speaker comes with two electrical wires to be connected to a siren controller system. High quality - equipped with corrosion-resistant heavy duty aluminum body with Black Finish and an impressive IP66 waterproof rating.
More information #ad
Package including: 1 x compact 200 watt high performance Extra Slim Siren Speaker Capable with Any 100 - 200 Watt Siren. Compatible with - capable with any 100 - 200 watt siren system. This ultra-thin speaker has a sound compression level of 125-135dB, Impedance: 8 Ohms and a frequency range of 400-4000Hz. Super loud - just because it is small does not mean it is weak. Note: the speaker cannot be connected to the power supply alone, and must be used in conjunction with the siren system.
Brand | BooYu #ad |
Manufacturer | BooYu #ad |
Height | 5.5 Inches |
Length | 5.63 Inches |
Width | 2.13 Inches |
Part Number | 600-B |
Model | 600-B |
More information #ad
5. Nippon America
#ad
PA Power Horn Speaker 100 Watt Indoor Outdoor 100W w Hifi Stereo Audio Amplifier
#adNippon America #ad - Speaker Horn with Amplifier. Amplifier input: dc 12v, 5a power: 20W max, 10W RMS. Mp3, speaker right and Left, vcd/dvd, audio in, and USB inputs. Indoor / outdoor Use; UV Protected. Power handling: 50w rms - 100w max; frequency Response: 350Hz - 9Khz.More information #ad
Brand | Nippon America #ad |
Manufacturer | Nippon America #ad |
Height | 9 Inches |
Length | 8.5 Inches |
Width | 12 Inches |
Part Number | TC-55 IS-AMP-220 |
Model | 4334420806 |
More information #ad
6. Pyle
#ad
Heavy Duty 700 Watt High Power Super Titanium Audio Tweeter System w/ Die Cast Aluminum Frame, 112 dB, Crossover Capacitor, Pyle PDBT78, 4-8 Ohm, 2kHz-25 kHz Frequency, 2 Inch Car Speaker Tweeter
#adPyle #ad - 350 watts rms/700 Watts Peak. Diamond Chrome Cutting Finish. 4-8 ohm impedance: this car tweeter has 112db/w/m sensitivity and 4-8 ohm impedance rating that compensates the undersized wire found in most cars. High temperature kapton voice coil. It ultimately reduces distortion so you can enjoy a crisp and clear sound.700 watt power: this high powered audio projection tweeter system has a maximum power output of 700-watt peak power / 350 watt RMS so you can play your favorite tracks as loud as you want and with style.
More information #ad
20 oz magnet: this tweeter has a 20 oz magnet structure w/ heavy-duty housing that provides a strong foundation. Die cast aluminum frame. Also, feature a diamond chrome cutting finish & die-cast aluminum frame. 20oz magnet Structure. Additional feature includes mylar crossover capacitor. Easy to install to your vehicle’s sound system w/ 3” mounting depth. 2” kapton voice coil: pyle pro follows the standard size for most car stereo systems and created this 2 inches super titanium car audio tweeter speaker with 2” high-temperature Kapton voice coil. 2khz - 25 khz frequency response: this car tweeter speaker has a frequency response of 2kHz - 25 kHz that will complete your current car woofer enclosure system for full-range stereo sound reproduction.
Brand | Pyle #ad |
Manufacturer | Pyle Pro #ad |
Height | 4.33 Inches |
Length | 7.25 Inches |
Weight | 4.41 Pounds |
Width | 5.83 Inches |
Part Number | PDBT78 |
Model | PDBT78 |
Warranty | 1-YEAR |
More information #ad
7. Audiopipe
#ad
3.5" Open Box, AudioPipe Compression Driver with ABS Horn Combo Car Speaker
#adAudiopipe #ad - Watts rms/70 watts max: speakers with a power handling of 35 watts RMS and peak power of 70 watts so you get great quality with less power.Output details: frequency response: 1k-20khZ; Sensitivity: 110dB ± 2Db; Impedance: 8 OHMS. Sizing: throat size: 1. 375 inches; mounting depth: 2. 875 inches 72 millimeters; Dimensions L x W x H: 4.
More information #ad
5 x 4. 5 x 5. 1 inches; Weight: 2. 5 pounds. Component details: titanium diaphragm; 1. 3-inch kapon voice coil; 3. 5-inch 90-millimeter X 059-inch 15-millimeter ferrite magnet; 12-ounce magnet. Compression driver speaker: audiopipe APHC-4550 high-frequency car speaker for audio heads who want to upgrade their vehicle's sound system.Brand | Audiopipe #ad |
Manufacturer | Audiopipe #ad |
Height | 0 Inches |
Length | 0 Inches |
Weight | 2.55 Pounds |
Width | 0 Inches |
Part Number | APHC-4550 |
Model | APHC4550 |
More information #ad
8. Pyramid
#ad
10' Pre-Wired Cord, 15 Watt Power, Outdoor Trumpet Car Horn Speaker, Pa Speaker for Cb Radio Car Siren System- Pyle PS5, 5” Pa Horn Speaker w/ 8 Ohms Impedance, Adjustable Bracket, 3.5mm Mono
#adPyramid #ad - 15 watt peak power: this heavy duty high powered cb radio pa speaker features 8 watts rms nominal power and 15 watts peak maximum power so you can amplify your sound with clarity and achieve your desired loudness.Loud and clear sound: this compact mono trumpet speaker is a perfect tool if you want to make your voice audio or music louder. Wiring included: a 10-inch pre-wired cord with 3. 5mm mono connector is included to make installation easier.
More information #ad
And comes with a one-year warranty. It features 8 ohm impedance and 112bd output, making it ideal for outdoor and indoor spaces. Adjustable bracket: the horn speaker can be bent and adjusted. Easily mount on the roof or under the car hood. Great frequency response: efficient enough to achieve your desired response, this 5” power horn speaker can amplify up to 450~5, 000hz. For easy maneuverability, the 5-inch ABS horn is equipped with a 180 degree swiveling adjustable mounting brackets. The power horn only weighs 093 lbs.
Brand | Pyramid #ad |
Manufacturer | Sound Around #ad |
Height | 5.25 Inches |
Length | 5.25 Inches |
Weight | 0.85 Pounds |
Width | 5.25 Inches |
Part Number | SP5 |
Model | SP5 |
More information #ad
9. P Acoustik
#ad
4X 1 Pro Audio Bullet Horn Super Tweeters Black 800W 4 Ohm NX-5
#adP Acoustik #ad - High density neodymium magnet 1" High Temperature Voice Coil Gold Plated Plug Terminal 4 Ohm Impedance. Machined aluminum chassis acrylic Phase Plug Die-Cast Aluminum Frame Diamond Black Cutting Finish.High-frequency range of 3, 000-20, 000 hz recommended power range: 15 - 100 watts RMS Per Channel High-Efficiency Bullet Tweeter Improves Treble Response Loaded Tweeter Acts Like A Piston To Pump Air.
More information #ad
New 2019 model with clear bullet two pair of 1" nx series pro audio titanium bullet horn tweeters Power Handling: Peak: 400 Watts Per Pair / 200 Watts Each Tweeter RMS: 200 Watts Per Pair / 100 Watts Each Tweeter. Sensitivity: 109 db frequency response: 3, 000 - 20, 000 Hz Top-Mount Depth 1. 5 inches Cutout Dimension 1. 75 inches.Brand | P Acoustik #ad |
Manufacturer | P Acoustik #ad |
Height | 6 Inches |
Length | 6 Inches |
Width | 4 Inches |
Part Number | NX-5 |
Model | NX-5 |
More information #ad
10. Xprite
#ad
Xprite Compact 200 Watt High Performance Siren Speaker Capable with Any 100-200 Watt Siren
#adXprite #ad - Capable with any 100 - 200 watt siren sytem Requirement: The actual output wattage of siren ≥ 100W. Package including: 1 x xprite compact 200 watt High Performance Siren Speaker Capable with Any 100 - 200 Watt Siren.More information #ad
Speaker: heavy duty, mounting Brackets, 200W / 8 Ohm. Corrosion-resistant aluminum housing with Black Finish. Speaker dimension: 8" w x 5-1/4" H x 6" D.Brand | Xprite #ad |
Manufacturer | Xprite #ad |
Height | 3 Inches |
Length | 7 Inches |
Width | 6 Inches |
Part Number | SIREN-200W-G1-SPEAKER |
Model | SIREN-200W-G1-SPEAKER |
More information #ad