As an Amazon Associate I earn from qualifying purchases.
Geekworm #ad - Packing list 1 xhdmi-to-csi-2 c779 2 x FFC Cable15cm/5. 91inch length. Compatibilitycompatible with raspberry pi 4 model b, raspberry pi 2 model b, raspberry pi 3 Model B+/3B, Raspberry Pi 1 Model B+, Raspberry Pi Zero W, Raspberry Pi Zero, Raspberry Pi 3 Model A+, Raspberry Pi Zero 2W.
Chipchip: toshiba tc358743xbg; input signal: hdmi; output signal: CSI; HDMI Input: 720p50ǐp60 80i50 80p25.
waveshare #ad - It is also compatible with raspberry pi 4 model b, raspberry pi 2 model B, Raspberry Pi 3 Model B+/3B, raspberry pi 1 model b+, Raspberry Pi 3 Model A+, Raspberry Pi Zero W Raspberry Pi Zero. Package content:hdMI to CSI Adapter x1.
waveshare #ad - It is compatible with all versions of raspberry pi series boards, Which supports Raspberry Pi 4B/3B+/3B/2B/3A+/Pi Zero/Zero W/Pi Zero WH.
Package content: hdMI to CSI Adapter x1. Which is designed for raspberry Pi with up to [email protected] support from HDMI input, backward compatible. It allows you to use hdmi cameras just as the standard Raspberry Pi CSI cameras.
Arducam #ad - This system works with all Raspberry Pi models. In addition to extend the camera signal, the adapter board provides another 3 signals to be extend with the camera signals together via the headphone jack connector.
It can be used to extend standard audio signals, GPIO signals or other sensor signals according to users need. If you need a longer and stronger cable with solid connections, it is right thing for you.
Geekworm #ad - X630-c1geekworm x630-c1 metal case specially designed for installing raspberry Pi 4 Model B & X630 Hdmi to CSI-2ASIN: B09GY9M9BX, NOT support Raspberry Pi 3.
X630x630 hdmi to csi-2 module is a raspberry pi hdmi to csi-2 module with Toshiba TC358743XBG chip, Hdmi-input supports up to 1080p/25fps. Reset modesupport hardware reset and software reset modes, strongly recommend to use software reset mode if you use X630 on raspberry pi hardware or raspberry pi os.
Geekworm #ad - X630-a2 is an audio hat for x630 hdmi to csi-2 moduleasin:b09gy9m9bx, to connect the black 10 pin cable from X630-A2 to X630, software guide refer to Geekworm X630 WiKi. Raspberry pi fan hatwith 3007 cooling fan, the X630-A2 can be used to cooling down your Raspberry Pi 4 board.
iUniker #ad - This is a raspberry pi camera module for hdmi to cSI-2 with Toshiba TC358743XBG chip, Hdmi-input supports up to 1080p25fps. Packing list: 1 xhdmi-to-csi-2, 2 x ffc Cable15cm/5. 91inch length 2x Heatsink Sets.
LNIMI #ad - Support for raspberry Pi linux kernel version to 4. 0 or higher. Limited by the performance of the Raspberry itself, up to 1080p @ 25. Support tK1 full expansion card.
Arducam #ad - Same sized with imx477 hq camera board, and compatible location and pitch of mounting hole, just assemble and connect the HDMI board with the camera board, with the included accessories and camera cable.
This system works with all Raspberry Pi models. By using high speed hdmi cable, the camera can run over 10 meters more than 10 meters wasn't tested, which high extends the usage of the Raspberry Pi High Quality cameras.
This arducam csi to hdmi adapter bundle is to extend the Raspberry Pi High Quality camera cable with a standard HDMI cable, it can also work with the RPi V1 and V2 cameras.
waveshare #ad - Combined with the jetson nano ai computer, road mark detection, this camera suits for AI projects such as:Face recognition, license plate recognition.
1. Geekworm
#adHdmi inpute Supports up to 1080p25fps Compatible with Raspberry Pi 4B/3B+/3B/Pi Zero/Zero W/Pi Zero 2W, Geekworm Raspberry Pi Hdmi-in Module, Hdmi to CSI-2 C779
#adChipchip: toshiba tc358743xbg; input signal: hdmi; output signal: CSI; HDMI Input: 720p50ǐp60 80i50 80p25.
More information #ad
Overviewthis is a raspberry pi hdmi to csi-2 module with Toshiba TC358743XBG chip, Hdmi-input supports up to 1080p25fps. User manualrefer to our wiki searchhdmi_tO_CSI-2; DO NOT use VNC, use monitor to test.| Brand | Geekworm #ad |
| Manufacturer | Geekworm #ad |
| Height | 0.2 Inches |
| Length | 2.56 Inches |
| Weight | 0.04 Pounds |
| Width | 1.38 Inches |
| Part Number | TB-2019-79 |
More information #ad
2. waveshare
#adSupport HDMI Input up to 1080p 30fps Compatible with Raspberry Pi 4B/3B+/3B/Pi Zero/Zero W,Raspberry Pi CSI Cameras, waveshare HDMI to CSI Camera Adapter
#adMore information #ad
It allows you to use hdmi cameras just as the standard Raspberry Pi CSI cameras. Note:if you need to use it for Raspberry Pi Zero, Zero W, extra FCC cable is required. This is an hdmi to csi camera port adapter, HDMI in Module, up to [email protected] support from HDMI input, backward compatible.| Brand | waveshare #ad |
| Manufacturer | Waveshare #ad |
| Part Number | HDMI to CSI Camera Adapter |
| Model | HDMI to CSI Camera Adapter |
More information #ad
3. waveshare
#adSupport from HDMI Input up to 1080p 30fps,as Raspberry Pi CSI Camera Usage Standard, Compatible with All Raspberry Pi 4B/3B+/3B/2B/3A+/Pi Zero/Zero W/WH, HDMI to CSI Camera Adapter
#adPackage content: hdMI to CSI Adapter x1. Which is designed for raspberry Pi with up to [email protected] support from HDMI input, backward compatible. It allows you to use hdmi cameras just as the standard Raspberry Pi CSI cameras.
More information #ad
Note:if you need to use it for raspberry pi zero, pi zero wH,, Pi Zero W, extra FCC cable is required. Such as raspberry Pi Zero V1. 3 camera Cable. This is a raspberry pi expansion module that converts hdmi signals to CSI signals HDMI to CSI camera port adapter.| Brand | waveshare #ad |
| Manufacturer | Waveshare #ad |
| Part Number | BC-HDMI Port to CSI Port Adapter-C |
More information #ad
4. Arducam
#ad1 Set, Arducam CSI to HDMI Cable Extension Module with 15pin 60mm FPC Cable for Raspberry Pi Camera Specific Pack of 2
#adIt can be used to extend standard audio signals, GPIO signals or other sensor signals according to users need. If you need a longer and stronger cable with solid connections, it is right thing for you.
More information #ad
By using high speed hdmi cable, the camera can run over 10 meters, that high extend the usage of the Raspberry pi cameras. This arducam csi to hdmi cable extension module is to extend the Raspberry Pi camera cable with a standard HDMI cable, it works with the V1 and V2 cameras.| Brand | Arducam #ad |
| Manufacturer | Arducam #ad |
| Height | 0.59 Inches |
| Length | 1.97 Inches |
| Width | 3.15 Inches |
| Part Number | B0091 |
| Model | B0091 |
More information #ad
5. Geekworm
#adHdmi Input Bridge TC358743 Supports up to 1080p/25Fps Compatible with Raspberry Pi 4 Model B Only, Geekworm Raspberry Pi Hdmi to CSI-2 Module X630 with Metal Case & Cooling Fan
#adX630x630 hdmi to csi-2 module is a raspberry pi hdmi to csi-2 module with Toshiba TC358743XBG chip, Hdmi-input supports up to 1080p/25fps. Reset modesupport hardware reset and software reset modes, strongly recommend to use software reset mode if you use X630 on raspberry pi hardware or raspberry pi os.
More information #ad
User manualrefer to Geekworm WiKi search X630 Packing list 1x x630 hdmi to csi-2 module 1x x630-a1 board 2x fpc cable5cm&15cm length1x x630-c1 metal Case with Cooling Fan1x Screws Pack Note: The FFC cable for Raspberry Pi Zero/Zero W is not included, need to purchase yourself.| Brand | Geekworm #ad |
More information #ad
6. Geekworm
#adGeekworm X630-A2 Auido Hat & Cooling Fan Expansion Board for X630 Hdmi to CSI-2 Module & Raspberry Pi 4 Model BNot Include X630 & Raspberry Pi 4
#adMore information #ad
Packing list: 1x x630-a2 board; 1x 10 pin cable; 4x M2. 5x12mm spacers; 8x M2. 5x5mm screws. Support x630-c1 case x630-a2 board is compatible to install into X630-C1 metal caseASIN:B09JP18BJW. Note: the raspberry pi 4, x630 module, X630-C1 case and power supply are all not included in the packing list.| Brand | Geekworm #ad |
| Manufacturer | Geekworm #ad |
| Height | 0.79 Inches |
| Length | 2.56 Inches |
| Weight | 0.06 Pounds |
| Width | 2.24 Inches |
| Part Number | TB-2022-40 |
| Warranty | 3 months |
More information #ad
7. iUniker
#adIUniker Raspberry Pi Hdmi to CSI-2 Module, Hdmi Input Module, Hdmi inpute Supports up to 1080p/25 Fps Compatible with Raspberry Pi 4B/3B+/3B/Pi Zero/Zero W
#adMore information #ad
This module compatible with raspberry pi 4 model b, raspberry pi 2 model B, Raspberry Pi 3 Model B+/3B, Raspberry Pi 3 Model A+, raspberry Pi Zero, raspberry pi 1 model b+, Raspberry Pi Zero W. Chip: toshiba tc358743xbg; input signal: HDMI; Output signal: CSI.| Brand | iUniker #ad |
| Manufacturer | iUniker #ad |
| Warranty | 12-Month |
More information #ad
8. LNIMI
#adLNIMI Upgraded Version for Raspberry Pi HDMI Board Interface to CSI-2 TC358743XBG for 4B 3B 3B+ Zero G11-011
#adMore information #ad
| Brand | LNIMI #ad |
| Manufacturer | LNIMI #ad |
| Part Number | 498408 |
| Model | 498408 |
More information #ad
9. Arducam
#adArducam CSI to HDMI Adapter Board for 12MP IMX477 Raspberry Pi HQ Camera, HDMI Cable Extension Module with 15pin 60mm FPC Cables
#adThis system works with all Raspberry Pi models. By using high speed hdmi cable, the camera can run over 10 meters more than 10 meters wasn't tested, which high extends the usage of the Raspberry Pi High Quality cameras.
More information #ad
If you need a longer and stronger cable with solid connections, or you prefer the HDMI cable to ribbon cable, it is the right thing for you. You'll be getting an hdmi adapter board to rpi, an hdmi adapter board to the camera, 2 × 60mm 15pin camera cables, a 78mm 15pin to 22pin camera cable for Arducam IMX477 series, and a set assemble accessories. This arducam csi to hdmi adapter bundle is to extend the Raspberry Pi High Quality camera cable with a standard HDMI cable, it can also work with the RPi V1 and V2 cameras.
| Brand | Arducam #ad |
| Manufacturer | Arducam #ad |
| Weight | 0.2 Pounds |
More information #ad
10. waveshare
#adCompatible with NVIDIA Jetson Nano Camera IMX219-160 8-Megapixels Camera Module 3280 × 2464 Resolution 160 Degree Wide Angle of View with IMX219 Sensor
#adMore information #ad
Imx219-160 camera, supports nvidia jetson nano Developer Kit, 160° FOV. Light and easy to use. Sensor: imX219. 3280 × 2464 high resolution, 8 Megapixels Camera.| Brand | waveshare #ad |
| Manufacturer | Waveshare #ad |
| Weight | 0.07 Pounds |
| Part Number | Jetson Nano Camera |
| Model | IMX219-160 Camera for Jetson Nano |
More information #ad
