As an Amazon Associate I earn from qualifying purchases.
KeeYees #ad - This module is safe, reliable, and scalable to a variety of applications. This board is used with 2. 4 ghz dual-mode wi-fi and bluetooth chips ESP-WROOM-32, as well as the 40nm low-power technology. Technical support: our pdf tutorial is available on this page.
Aokin #ad - It is an ideal solution for IoT applications. Specifications: the board uses high-performance dual-core 32-bit lx6 cpu, on-chip sensor, traditional Bluetooth, temperature sensor, integrates WiFi, Hall sensor, can be used as an application processor, and low power BLE. Small and compact design, can fit on a solderless breadboard, saves space for your project.
The esp32-cam camera module is based on an esp32 chip with an ov2640 2mp camera, built-in flash, also supports OV7670 cameras. Note: since comes with esp32-cam-mb: micro usb to serial port ch340c chip, so no longer needs to use a converter to program it.
Its main frequency adjustment ranges from 80MHz to 240MHz, adopts 7-stage pipeline architecture, and so on. Use: esp32-cam can be widely used in various iot applications, industrial wireless control, suitable for home smart devices, wireless monitoring, QR wireless identification, wireless positioning system signals, and other IoT applications. Plug and play, use the micro usb cable to connect the PC and the ESP32-CAM-MB board.
YWBL-WH #ad - This module is has multi-functions of Bluetooth, 4MB flash. Support three modes: AP, STA and AP+STA. Looking forwar to your consultation! Please feel free to email us if you have any questions or you would have a bulk order, how to email us? Click MakerFocus and Ask a question.
Lithium battery interface, 500mA maximum charging current. Esp32 is already integrated with antenna and rf balun, filters, low noise amplifiers, WiFi, power amplifier, and the power management module.
AITRIP #ad - Support lwiP protocol, Freertos. Esp32 is a safe, reliable, and scalable to a variety of applications. Supportthree modes: ap, STA, and AP+STA. 2. 4ghz dual mode wifi + Bluetooth Development Board. Ultra-low power consumption, Compatible with Arduino IDE.
MELIFE #ad - Support lwiP protocol, Freertos. Ultra-low power consumption, works perfectly. Esp32 is a safe, reliable, and scalable to a variety of applications. Supportthree modes: ap, STA, and AP+STA. 2 pack 2. 4ghz dual mode wifi + Bluetooth Development Board.
Stemedu #ad - The complete system of the ESP32 chip has been integrated into the SIP module. If any questions, how to email us? please click "Stemedu" you can find Sold by Stemedu under Buy Now button, in the new page, click "Ask a question" to email us.
Requiring only external antenna with LC matching network, decoupling capacitors and pull-up resistors for EN signals to function properly. Document link http://esp-idfdotreadthedocsdotio/en/latest/get-started/get-started-pico-kitdothtml#get-started-pico-kit-v4-board-front.
The development board features a usb-uART Bridge circuit which allows developers to connect the board to a computer's USB port for flashing and debugging. Compared to other esp32 modules, esp32-pico-d4 also integrates 40 mhz crystal oscillator, Filter capacitors, 4 MB flash, RF matching links. Esp32-pico-d4: standard esp32-pico-d4 module soldered to the esp32-pico-kit v4 board.
Hosyond #ad - In addition, the pins on both sides of the development board are convenient for developers to connect and use. It has power indicator red light and working status indicator blue light on it, so you can know the status of the module at any time.
The main body of the module is esp-wroom-32 module, which can be directly debugged by a USB connected computer, and the peripheral uses the USB serial port chip CP2102 to expand the micro USB interface, and the data transmission is fast and stable.
In addition, which expands the range of its resources available and greatly improves the ease of learning and development. Small size: esp-32 dual-mode module is compact and easy to embed into your device, it is convenient to use for you. And it is compatible with Arduino IDE.
HiLetgo #ad - Supportthree modes: ap, STA, and AP+STA. Esp32 is a safe, reliable, and scalable to a variety of applications. Ultra-low power consumption, works perfectly with the Arduino IDE. 2. 4ghz dual mode wifi + Bluetooth Development Board. Support lwiP protocol, Freertos.
Aokin #ad - It is an ideal solution for IoT applications. Features: the board fully compliant with wifi 802. 11b/g/n/e/i and bluetooth 4. 2 standards, sta/ap/sta+ap working mode, maximum 4g tf card, have 9 gpio ports, image wifi upload, built-in 520 kb sraM plus 4MB PSRAM, secondary development, multiple sleep modes, support UART/SPI/I2C/PWM and other interfaces, etc.
Small and compact design, saves space for your project. The esp32-cam camera module is based on an esp32 chip with an ov2640 2mp camera, can fit on a solderless breadboard, built-in flash, also supports OV7670 cameras.
Specifications: the board uses high-performance dual-core 32-bit lx6 cpu, traditional bluetooth, and low power BLE. If you have any questions about our ESP32-CAM development board, please contact us by Amazon message, we will do our best for you. Its main frequency adjustment ranges from 80mhz to 240MHz, adopts 7-stage pipeline architecture, can be used as an application processor, integrates WiFi, Hall sensor, temperature sensor, on-chip sensor, and so on.
DORHEA #ad - It is suitable for home smart devices, QR wireless identification, industrial wireless control, wireless monitoring, wireless positioning system signals and other IoT applications. When the camera is working, please leave io0 in the air when using it, please pull GPIO32 low; Since IO0 is connected to the camera XCLK, and do not connect it to high or low level.
It is an ideal solution for IoT applications. Esp32 cam using low-power dual-core 32-bit cpu, main frequency up to 240mhz, it can be used as a master mode to build an independent network controller, can be used as an application processor, computing power up to 600 DMIPS, or as a slave to other host MCUs to add networking capabilities to existing devices.
The esp32 cam equips the esp32 with everything necessary to program, the board reserved the MPU6050, run and develop on the wonderchip. Esp32-cam can be widely used in various iot applications. Note: please make sure that the input power of the module is at least 5v 2a, otherwise the picture may have water lines; The ESP32 GPIO32 pin controls the camera power. Additionally, bmE280 and an analog MIC.
1. KeeYees
#ad2PCS, KeeYees ESP32S ESP32 Development Board 2.4 GHz Dual Core WLAN WiFi + Bluetooth 2-in-1 Microcontroller ESP-WROOM-32 Chip for Arduino 38PIN Narrow Version
#adMore information #ad
Support of three modes: AP, STA and AP + STA. Narrower width, compatible with breadboard. The module has 38 pins and has more features than a 30-pin module. Support lua program, easy to develop. Please pull down this page to find the tutorial: User Guide PDF.| Brand | KeeYees #ad |
| Manufacturer | KeeYees #ad |
More information #ad
2. Aokin
#adAokin ESP32-CAM Camera Module, 1 Pcs, ESP32 Development Board WiFi and Bluetooth with OV2640 2MP Camera for Arduino, Include ESP32-CAM-MB Micro USB to Serial Port CH340C
#adThe esp32-cam camera module is based on an esp32 chip with an ov2640 2mp camera, built-in flash, also supports OV7670 cameras. Note: since comes with esp32-cam-mb: micro usb to serial port ch340c chip, so no longer needs to use a converter to program it.
More information #ad
Features: the board fully compliant with wifi 802. 11b/g/n/e/i and bluetooth 4. 2 standards, image wifi upload, maximum 4g tf card, sta/ap/sta+ap working mode, secondary development, have 9 GPIO ports, multiple sleep modes, support uart/spi/i2c/pwm and other interfaces, built-in 520 KB SRAM plus 4MB PSRAM, etc. Its main frequency adjustment ranges from 80MHz to 240MHz, adopts 7-stage pipeline architecture, and so on. Use: esp32-cam can be widely used in various iot applications, industrial wireless control, suitable for home smart devices, wireless monitoring, QR wireless identification, wireless positioning system signals, and other IoT applications. Plug and play, use the micro usb cable to connect the PC and the ESP32-CAM-MB board.
| Brand | Aokin #ad |
| Manufacturer | Aokin #ad |
| Part Number | A89-1 |
| Warranty | 3 months |
More information #ad
3. YWBL-WH
#adESP32 Development Board WiFi Bluetooth Dual Module ESP WROOM Lolin32 V1.0.0 WIFI
#adLithium battery interface, 500mA maximum charging current. Esp32 is already integrated with antenna and rf balun, filters, low noise amplifiers, WiFi, power amplifier, and the power management module.
More information #ad
It is 2. 4 ghz dual mode wifi and bluetooth chips by tsmc 40nm low power technology, reliable, Small volume, power and optimized RF characteristics, with the support of lwIP protocol, freertos; High performance, which is safe, and scalable to a wide range of applications; Strong function, easy embeded to other products.| Brand | YWBL-WH #ad |
| Manufacturer | YWBL-WH #ad |
| Height | 2.36 Inches |
| Length | 3.15 Inches |
| Weight | 0.02 Pounds |
| Width | 2.76 Inches |
| Part Number | YWBL-WHdi4geso6vx |
More information #ad
4. AITRIP
#adESP-WROOM-32 ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with Antenna RF AMP Filter AP STA Compatible with Arduino IDE 3PCS
#adMore information #ad
| Brand | AITRIP #ad |
| Manufacturer | AiTrip #ad |
| Part Number | 15363 |
More information #ad
5. MELIFE
#adMELIFE 2 Pack ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with ESP32s Antenna RF AMP Filter AP STA.
#adMore information #ad
| Brand | MELIFE #ad |
| Manufacturer | MELIFE #ad |
| Part Number | 15461 |
More information #ad
6. Stemedu
#adStemedu ESP32-PICO-KIT V4.1 ESP32 Development Board WiFi + Bluetooth Dual Modes USB-UART 4MB flash Microcontroller Module for Ar-duino
#adRequiring only external antenna with LC matching network, decoupling capacitors and pull-up resistors for EN signals to function properly. Document link http://esp-idfdotreadthedocsdotio/en/latest/get-started/get-started-pico-kitdothtml#get-started-pico-kit-v4-board-front.
More information #ad
This setup reduces the costs of additional external components as well as the cost of assembly and testing and also increases the overall usability of the product. The development board features a usb-uART Bridge circuit which allows developers to connect the board to a computer's USB port for flashing and debugging. Compared to other esp32 modules, esp32-pico-d4 also integrates 40 mhz crystal oscillator, Filter capacitors, 4 MB flash, RF matching links. Esp32-pico-d4: standard esp32-pico-d4 module soldered to the esp32-pico-kit v4 board.
| Brand | Stemedu #ad |
| Manufacturer | ESPRESSIF SYSTEMS (SHANGHAI) PTE LTD #ad |
More information #ad
7. Hosyond
#adHosyond 2Pack ESP32 Development Board WiFi + Bluetooth CP2102 Chip Dual Core Internet of Things Microcontroller Compatible with Arduino
#adThe main body of the module is esp-wroom-32 module, which can be directly debugged by a USB connected computer, and the peripheral uses the USB serial port chip CP2102 to expand the micro USB interface, and the data transmission is fast and stable.
More information #ad
There are two touch buttons, one is reset, the other is enable module to enter the halberd program mode. Of course, the module supports for NodeMCU and other development environments, it can also be widely used in Internet of things occasions. In addition, which expands the range of its resources available and greatly improves the ease of learning and development. Small size: esp-32 dual-mode module is compact and easy to embed into your device, it is convenient to use for you. And it is compatible with Arduino IDE.
| Brand | Hosyond #ad |
| Manufacturer | Hosyond #ad |
| Warranty | NO |
More information #ad
8. HiLetgo
#adHiLetgo ESP-WROOM-32 ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with Antenna RF AMP Filter AP STA for Arduino IDE
#adMore information #ad
| Brand | HiLetgo #ad |
| Manufacturer | HiLetgo #ad |
| Part Number | 3-01-1287 |
| Model | 3-01-1287 |
More information #ad
9. Aokin
#adAokin ESP32-CAM Camera Module, ESP32 Development Board WiFi and Bluetooth with OV2640 2MP Camera for Arduino, 3 Pcs
#adSmall and compact design, saves space for your project. The esp32-cam camera module is based on an esp32 chip with an ov2640 2mp camera, can fit on a solderless breadboard, built-in flash, also supports OV7670 cameras.
More information #ad
Use: esp32-cam can be widely used in various iot applications, wireless monitoring, QR wireless identification, wireless positioning system signals, industrial wireless control, suitable for home smart devices, and other IoT applications. Specifications: the board uses high-performance dual-core 32-bit lx6 cpu, traditional bluetooth, and low power BLE. If you have any questions about our ESP32-CAM development board, please contact us by Amazon message, we will do our best for you. Its main frequency adjustment ranges from 80mhz to 240MHz, adopts 7-stage pipeline architecture, can be used as an application processor, integrates WiFi, Hall sensor, temperature sensor, on-chip sensor, and so on.
| Brand | Aokin #ad |
| Manufacturer | Aokin #ad |
| Part Number | 88-3 |
More information #ad
10. DORHEA
#ad5PCS ESP32-CAM Camera Module WiFi Bluetooth Development Board ESP32 Wireless OV2640 Camera Module with Jumper Wire
#adIt is an ideal solution for IoT applications. Esp32 cam using low-power dual-core 32-bit cpu, main frequency up to 240mhz, it can be used as a master mode to build an independent network controller, can be used as an application processor, computing power up to 600 DMIPS, or as a slave to other host MCUs to add networking capabilities to existing devices.
More information #ad
The esp32 cam equips the esp32 with everything necessary to program, the board reserved the MPU6050, run and develop on the wonderchip. Esp32-cam can be widely used in various iot applications. Note: please make sure that the input power of the module is at least 5v 2a, otherwise the picture may have water lines; The ESP32 GPIO32 pin controls the camera power. Additionally, bmE280 and an analog MIC.
| Brand | DORHEA #ad |
| Manufacturer | DORHEA #ad |
| Part Number | 13622-1 |
| Model | 13622-1 |
More information #ad
