As an Amazon Associate I earn from qualifying purchases.
FOTGA #ad - When the green light is on, the battery works normally. It is especially designed for blackmagic Pocket Cinema Camera 4K 6K and 6K Pro camera, with 12V output.
The f970 battery buckling board has a low battery indicator. There is also a 7. 4v output port for connecting to power different device. 1/4" screw mount for placing it on any plate with 1/4" screw hole.
kocackoo #ad - V-lock mount which access the quick release the battery attachments. The v lock battery plate features a 15 vdc barrel output, a 12 VDC barrel outputs, a 5 VDC barrel outputs, an 8 vdc barrel output, a D-Tap output and two USB port.
Smart and wide applications power output systems. 15mm rod clamp which suit for 15mm rod pass through on DSLR rigs and gimbals. The cable includes dc 5. 5*2. 5mm right angle to weipu two-pin locking connector cable, this cable is suitable for BMPCC 4K/6K.
foto4easy #ad - There is also a 7. 4v output port for connecting to power different device. 1/4" screw mount for placing it on any plate with 1/4" screw hole. The f970 battery buckling board has a low battery indicator. Packaage includes: 1 x power cable for NP-F970 to Blackmagic Pocket Cinema Camera.
SMALLRIG #ad - Please note the product has no built-in battery. It provides different output ports, including a 12V DC 5. 5/2. 5mm output port and a 7. 4v dc 5. 5/2. 1mm output port. 6. 5. When the indicator flashes, it means the battery level is less than 10 percent, and you need to replace the battery.
Dc to 2 pin lemo cable length: 40cm. Lp-e6 dummy battery cable length: 60cm. Please plug the cable to the corresponding DC output: LP-E6 to 7.
Please do not use it in a damp environment to avoid a short circuit. It comes with an lp-e6 dummy battery cable and a DC to 2 Pin LEMO cable. 3. The plate features a rubber pad on the bottom for a more stable installation. It features an led indicator that will turn red when the battery level is less than 30 percent. 2. Note: 1.
Tilta #ad - Weight: 0741 lbs. This v-mount battery plate allows you to power a compatible camera as well as external accessories using V-mount batteries and the plate’s integrated P-tap/DC power ports.
KOERTACOO #ad - You can also use the 8V/3A interface as input the battery must be removed. 2 input ports: type-c 5v/2a interface, used to charge sony NP-F series battery, the battery can work while charging. 1 x 1/4" hot Shoe Mount.
1x storage bag. 1 x dc male to Male Coiled Cable. 1 x type-c 3a data line. 1 x 1/4" hand screw. 1 x bmpcc 4k dc cable. 1 x lp-e6 dummy battery charging cable. It is specially designed for blackmagic pocket cinema camera 4k and 6k pro and canon eos cameras, it comes with a dc-2 pin charging cable and a LP-E6 dummy battery charging cable connected to your BMPCC 4K/6K and Canon EOS 5D2 5D3 5D4 6D 6D2 60D 7D 7D2 70D 80D 90D 5DSR Cameras.
4 output ports: np-f battery plate has a dc 5. 5*2. 1mm 8v/3a input/output port, a usb-a 5v/1. 5a output, a dc 5. 5*2. 5mm 12v/2a output port, a usb- c automatically switches to 5V/2A 9V / 2A output fast charging. The 8v/3a interface is suitable for most 7. 4v-9v dc couplers and dummy batteries. Package include:1 x battery adapter plate.
SMALLRIG #ad - Adjustable armthe v lock battery plate 3204 features an adjustable arm for quick adjustment of the V mount battery position, you can mount the battery vertically or hang it upside down on the rod system. Multiple output portsthe smallrig 3204 comes with an 8v dc & two 12v dc and a 14. 2v d-tap, etc.
Besides, a phone, which satisfy different requests of customers. Dual 15 mm rod clampthe plate 3204 comes with a dual 15 mm rod clamp to help install the plate to your 15 mm lws rod system easily and quickly. It utilizing the standard V-port structure so that it suitable for most V mount batteries in the market.
Note do not use in damp environment to avoid short circuit; The plate fits most V mount batteries but PAGlink series V mount batteries and Patona Premium Battery for BP-190WS. Furthermore, there are several 1/4"- 20 thread holes on the surface of it, you can attach other SmallRig porducts like Magic Arm 2158 or other accessories to this V mount Battery adapter plate.
Alvin's Cables #ad - With a 1/4" manual screw and hot shoe mount, you can easily install the battery plate on your camera or other device. There is a power switch to control, please turn off it when the temparature is too high. Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping.
What's in the package: np-f battery plate×1, min length 12 inches bmpcc-dc cable×1, 12 inches DC-DC cable×1, 1/4” hot shoe mount×1（Fix the battery plate on the device）.
Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once. Please ensure to use the correct rated voltage and current of the electrical equipment. This cable is specially designed for the blackmagic Pocket Cinema Camera 4K 6K camera need to plug in DC 8V interface hole, to increase shoot time and to reduce battery charging downtime.
SMALLRIG #ad - Multiple output portsthe smallrig 3203 comes with an 8v dc & two 12v dc and a 14. 2v d-tap output ports, which satisfy different requests of customers. Furthermore, there are several 1/4"- 20 thread holes on the surface of it, you can attach other SmallRig products like Magic Arm 2158 or other accessories to this V mount Battery adapter plate.
High customizationsmallrig v mount battery adapter plate 3203 is designed to provide longer battery life for your camera equipment through V-mounted batteries. It features a 5v/2a usb output port to power your camera and other external accessories like a monitor, etc.
It utilizing the standard V-port structure so that it suitable for most V mount batteries in the market. Well-made materiallightweight design with only 324g, this durable aluminum structure has strong hardness and quality, which improves the durability of products. Besides, a phone, it also features a power switch that controls all of the output ports to power on or power off your rig more quickly and conveniently.
SMALLRIG #ad - Well-made materiallightweight design with only 362g, this durable aluminum structure has strong hardness and quality, which improves the durability of products. It is compatible with bmpcc 4k & 6k & 6K Pro & Mirrorless and DSLR cameras. Crab-shaped clampthe plate 3202 is equipped with crab-shaped clamp that fits rod diameter of 15mm to 30mm.
It can be installed on different accessories such as a tripod, light stand and a handheld ring for gimbals. Besides, which satisfy different requests of customers. High customizationsmallrig v mount battery adapter plate 3202 is designed to provide longer battery life for your camera equipment through V-mounted batteries.
2v d-tap output ports, etc. It utilizing the standard V-port structure so that it suitable for most V mount batteries in the market. Note do not use in damp environment to avoid short circuit; in order to achieve the maximum compatibility of the crab-shaped clamp, avoid installing the crab-shaped clamp in the center of the plate. It features a 5v/2a usb output port to power your camera and other external accessories like a monitor, a phone, It also features a power switch that controls all of the output ports to power on or power off your rig more quickly and conveniently.
1. FOTGA
#adCompatible with Sony NP-F970 F960 F770 F750 F570 F550 Battery, Fotga Power Adapter Cable for NP-F970 Battery Plate Board to Power Blackmagic Pocket Cinema Camera 4K 6K Pro BMPCC 4K Movie Camera
#adThe f970 battery buckling board has a low battery indicator. There is also a 7. 4v output port for connecting to power different device. 1/4" screw mount for placing it on any plate with 1/4" screw hole.
More information #ad
Cable Length:60cm. Material: aluminum, packaage includes: 1 x power cable for NP-F970 to Blackmagic Pocket Cinema Camera, 1 x Screwdriver Camera and battery are not included. When the red light is on, it indicates that the battery needs to be replaced. Compatible with compatible with: sony np-f970, F770, F750, F960, f570, F550 battery.| Brand | FOTGA #ad |
| Manufacturer | FOTGA #ad |
| Weight | 0.19 Pounds |
| Part Number | NJ221 |
| Model | 6543871343 |
More information #ad
2. kocackoo
#adKOCACKOO V-Mount Lock Battery Plate Power Supply Splitter Adapter with 15mm Rod Clamp + BMPCC 4K and 6K Locking DC Cable for Blackmagic Pocket Cinema Camera 4K/6K.
#adSmart and wide applications power output systems. 15mm rod clamp which suit for 15mm rod pass through on DSLR rigs and gimbals. The cable includes dc 5. 5*2. 5mm right angle to weipu two-pin locking connector cable, this cable is suitable for BMPCC 4K/6K.
More information #ad
Low static power comsumption; low temperature coefficient; high conversion efficiency. Over output protection circuit; automatic lock protection. A power switch is provided on the side to turn everything on or off. With the help of the battery plate power up BMPCC 4K/6K, monitors, DSLR cameras, led lights, cellphone, on camera flash.| Brand | kocackoo #ad |
| Manufacturer | RUITOO #ad |
| Model | KOCACKOO-XTB-1 |
More information #ad
3. foto4easy
#adFoto4easy Power Adapter Plate for NP-F970 Battery to Blackmagic Pocket Cinema Camera 4K 6K BMPCC 4K Camera,Compatible with Sony NP-F970 F960 F770 F750 F570 F550 Battery
#adMore information #ad
Compatible with: sony np-f970 np-f960 np-f770 np-f750 nP-F570 NP-F550 battery. When the green light is on, the battery works normally. It is especially designed for Blackmagic Pocket Cinema Camera 4K 6K camera, with 12V output. When the red light is on, it indicates that the battery needs to be replaced.| Brand | foto4easy #ad |
| Manufacturer | Foto4easy #ad |
| Height | 0.39 Inches |
| Length | 2.17 Inches |
| Width | 1.85 Inches |
| Part Number | FF-NJ221-US |
More information #ad
4. SMALLRIG
#ad3093, SMALLRIG NP-F Battery Adapter Plate Lite for BMPCC 4K & 6K, ABS Material
#adDc to 2 pin lemo cable length: 40cm. Lp-e6 dummy battery cable length: 60cm. Please plug the cable to the corresponding DC output: LP-E6 to 7.
More information #ad
4v, dc-2 pin to 12V; 4. Smallrig np-f battery adapter plate lite for bmpcc 4k & 6k 3093 is designed to provide greater battery life for BMPCC 4K, 6K, or other devices via a Sony NP-F battery. Please do not use it in a damp environment to avoid a short circuit. It comes with an lp-e6 dummy battery cable and a DC to 2 Pin LEMO cable. 3. The plate features a rubber pad on the bottom for a more stable installation. It features an led indicator that will turn red when the battery level is less than 30 percent. 2. Note: 1.
| Brand | SMALLRIG #ad |
| Manufacturer | 3093-SR #ad |
More information #ad
5. Tilta
#adTilta V-Mount Battery Plate TA-BTP2-V-G 15mm LWS Rod Adapter To Power The BMPCC 4K 6K Camera
#adMore information #ad
Color: tilta Gray Finish. The 15mm lws rod adapter allows you to attach the battery plate to your camera’s rod setup. Material: aluminum-alloy, stainless steel, ABS plastic.| Brand | Tilta #ad |
| Manufacturer | Tilta #ad |
| Weight | 0.66 Pounds |
| Part Number | TA-BTP-V |
| Model | TA-BTP2-V-G |
More information #ad
6. KOERTACOO
#adKOERTACOO NP-F Battery Adapter Plate + BMPCC 4K and 6K DC Cable and LP-E6 Dummy Battery to Power Blackmagic Pocket Cinema Camera 4K/6K,Compatible with Sony NP-F970 F960 F770 F750 F570 F550 Battery.
#ad1x storage bag. 1 x dc male to Male Coiled Cable. 1 x type-c 3a data line. 1 x 1/4" hand screw. 1 x bmpcc 4k dc cable. 1 x lp-e6 dummy battery charging cable. It is specially designed for blackmagic pocket cinema camera 4k and 6k pro and canon eos cameras, it comes with a dc-2 pin charging cable and a LP-E6 dummy battery charging cable connected to your BMPCC 4K/6K and Canon EOS 5D2 5D3 5D4 6D 6D2 60D 7D 7D2 70D 80D 90D 5DSR Cameras.
More information #ad
4 output ports: np-f battery plate has a dc 5. 5*2. 1mm 8v/3a input/output port, a usb-a 5v/1. 5a output, a dc 5. 5*2. 5mm 12v/2a output port, a usb- c automatically switches to 5V/2A 9V / 2A output fast charging. The 8v/3a interface is suitable for most 7. 4v-9v dc couplers and dummy batteries. Package include:1 x battery adapter plate.
| Brand | KOERTACOO #ad |
| Manufacturer | KOERTACOO #ad |
| Part Number | KOERTACOO-XTB-NPF |
| Warranty | One year replacement |
More information #ad
7. SMALLRIG
#ad3204, SmallRig V Mount Battery Adapter Plate for BMPCC 4K & 6K & 6K Pro, Mirrorless DSLR Cameras, Comes with 8V/12V/14.2V D-Tap/5V 2A USB Output Ports & 15 mm Rod Clamp and Adjustable Arm
#adBesides, a phone, which satisfy different requests of customers. Dual 15 mm rod clampthe plate 3204 comes with a dual 15 mm rod clamp to help install the plate to your 15 mm lws rod system easily and quickly. It utilizing the standard V-port structure so that it suitable for most V mount batteries in the market.
More information #ad
It is compatible with bmpcc 4k & 6k & 6K Pro & Mirrorless and DSLR cameras. High customizationsmallrig v mount battery adapter plate 3204 is designed to provide longer battery life for your camera equipment through V-mounted batteries. It features a 5v/2a usb output port to power your camera and other external accessories like a monitor, It also features a power switch that controls all of the output ports to power on or power off your rig more quickly and conveniently. Note do not use in damp environment to avoid short circuit; The plate fits most V mount batteries but PAGlink series V mount batteries and Patona Premium Battery for BP-190WS. Furthermore, there are several 1/4"- 20 thread holes on the surface of it, you can attach other SmallRig porducts like Magic Arm 2158 or other accessories to this V mount Battery adapter plate.
| Brand | SMALLRIG #ad |
| Manufacturer | SMALLRIG #ad |
| Height | 4.25 Inches |
| Length | 6.64 Inches |
| Weight | 0.89 Pounds |
| Width | 2.41 Inches |
| Part Number | 3204-SR |
| Model | 3204-SR |
More information #ad
8. Alvin's Cables
#adNP-F970 Power Adapter Cable for BMPCC 4K 6K Blackmagic Pocket Cinema Camera NP-F Series Power Supply Mount Battery Plate Compatible with Sony NP-F970 F960 F770 F570 F550 Battery
#adWhat's in the package: np-f battery plate×1, min length 12 inches bmpcc-dc cable×1, 12 inches DC-DC cable×1, 1/4” hot shoe mount×1（Fix the battery plate on the device）.
More information #ad
There are two dc output ports whose output voltage are respectively 8V and 12V, allowing you to use for other devices, such as video monitors, LED lights, etc. Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once. Please ensure to use the correct rated voltage and current of the electrical equipment. This cable is specially designed for the blackmagic Pocket Cinema Camera 4K 6K camera need to plug in DC 8V interface hole, to increase shoot time and to reduce battery charging downtime.
| Brand | Alvin's Cables #ad |
| Manufacturer | Alvin's Cables #ad |
| Part Number | CBMPW2F |
More information #ad
9. SMALLRIG
#ad3203, Mirrorless DSLR Cameras, SmallRig V Mount Battery Adapter Plate for BMPCC 4K & 6K & 6K Pro, Comes with 8V/12V/14.2V D-Tap/5V 2A USB Output Ports and 15 mm Rod Clamp
#adHigh customizationsmallrig v mount battery adapter plate 3203 is designed to provide longer battery life for your camera equipment through V-mounted batteries. It features a 5v/2a usb output port to power your camera and other external accessories like a monitor, etc.
More information #ad
It is compatible with bmpcc 4k & 6k & 6K Pro & Mirrorless and DSLR cameras. Dual 15 mm rod clampthe plate 3203 comes with a dual 15 mm rod clamp to help install the plate to your 15 mm lws rod system easily and quickly. Note do not use in damp environment to avoid short circuit; The plate fits most V mount batteries but PAGlink series V mount batteries and Patona Premium Battery for BP-190WS. It utilizing the standard V-port structure so that it suitable for most V mount batteries in the market. Well-made materiallightweight design with only 324g, this durable aluminum structure has strong hardness and quality, which improves the durability of products. Besides, a phone, it also features a power switch that controls all of the output ports to power on or power off your rig more quickly and conveniently.
| Brand | SMALLRIG #ad |
| Manufacturer | SMALLRIG #ad |
| Height | 4.25 Inches |
| Length | 6.64 Inches |
| Weight | 0.89 Pounds |
| Width | 1.3 Inches |
| Part Number | 3203-SR |
| Model | 3203-SR |
More information #ad
10. SMALLRIG
#ad3202, SmallRig V Mount Battery Adapter Plate for BMPCC 4K & 6K & 6K Pro, Mirrorless DSLR Cameras, Comes with 8V/12V/14.2V D-Tap/5V 2A USB Output Ports and Crab-Shaped Clamp
#adIt can be installed on different accessories such as a tripod, light stand and a handheld ring for gimbals. Besides, which satisfy different requests of customers. High customizationsmallrig v mount battery adapter plate 3202 is designed to provide longer battery life for your camera equipment through V-mounted batteries.
More information #ad
The plate fits most v mount batteries but PAGlink series V mount batteries and Patona Premium Battery for BP-190WS. There are several 1/4"- 20 thread holes on the surface of 3202, allows for attaching a SmallRig Magic Arm 2158 or other accessories, etc. Multiple output portsthe smallrig 3202 comes with an 8v dc & two 12v dc and a 14. 2v d-tap output ports, etc. It utilizing the standard V-port structure so that it suitable for most V mount batteries in the market. Note do not use in damp environment to avoid short circuit; in order to achieve the maximum compatibility of the crab-shaped clamp, avoid installing the crab-shaped clamp in the center of the plate. It features a 5v/2a usb output port to power your camera and other external accessories like a monitor, a phone, It also features a power switch that controls all of the output ports to power on or power off your rig more quickly and conveniently.
| Brand | SMALLRIG #ad |
| Manufacturer | SMALLRIG #ad |
| Height | 3.64 Inches |
| Length | 5.59 Inches |
| Weight | 0.89 Pounds |
| Width | 3.35 Inches |
| Part Number | 3202-SR |
| Model | 3202-SR |
More information #ad
