Top 10 Bash Digital Subwoofer Amplifier – Audio Component Amplifiers

As an Amazon Associate I earn from qualifying purchases.

1. Dayton Audio

#ad

Dayton Audio SA100 100W Subwoofer Plate Amplifier

#ad
Dayton Audio #ad - Auto on/off. Adjustable low pass crossover. High and low level inputs/outputs. 75 watts rms @ 8 ohms, 100 watts RMS @ 4 ohms. Low distortion audiophile sound.
BrandDayton Audio #ad
ManufacturerDayton Audio #ad
Height7.48 Inches
Length4.72 Inches
Weight8.55 Pounds
Width8.66 Inches
Part NumberSA100
ModelSA100

2. Douk Audio

#ad

Nobsound G2 Subwoofer Amplifier Mono Power Amp PBTL/BTL Bridge 100W Mini Sub Amp Home Theater

#ad
Douk Audio #ad - Prompt and courteous customer service. Applications: ① g2 can be used as a subwoofer power amplifier for passive subwoofers; ② g2 can be used as a mono amp to drive single channel. It has a gain setting which allows 4-level of output level setting 20/26/32/36 dB.

It can keep the purity of the sound and avoid the resistor influence. Its optimized circuit can ensure totally no background noise. Besides, it also has a bass cutoff frequency control knob. For any questions you have, please feel free to contact us. Equipped with 19V 4. 74a high quality power supply. Besides, it also built-in speaker protection circuit and low pass bass filter. Compared with normal 2. 0ch amps, it can ensure totally no interference between two channels and can provide higher power.

It adopts ti tpa3116 and ne5532 op-amp, which can offer 100w high power and can drive most home sub and mono speakers. It has a mode switcher which can change between SUB and PBLT modes conveniently. You can use two g2 to drive left and right channel separately, which are known as PBLT / BTL Bridge amp. G2 can be used as a sub amp or a mono channel amp.
BrandDouk Audio #ad
ManufacturerNobsound #ad
Part NumberDZ056
Model8541737971

3. BOSS Audio Systems

#ad

BOSS Audio Systems KIT2 8 Gauge Amplifier Installation Wiring Kit, A Car Amplifier Wiring Kit Helps You Make Connections and Brings Power To Your Radio, Subwoofers and Speakers

#ad
BOSS Audio Systems #ad - 3 foot - 8 gauge Black Ground Cable. 16 foot / 18 gauge blue turn-on wire, 30 Foot / 16 Gauge Speaker Wire. 20 foot high performance rCA Interconnect, 6 Foot Split Loom Tubing. 20 4" wire ties, 3 Rubber Grommets. 20 foot / 8 gauge red power Cable, High Quality Competition Fuse Holder. 5/16" ring terminals, 1/4" Ring Terminals, 4 Speaker Terminals.
BrandBOSS Audio Systems #ad
ManufacturerBOSS AUDIO #ad
Height7.6 Inches
Length7.6 Inches
Weight1.98 Pounds
Width2.8 Inches
Part NumberKIT-2
ModelKIT-2
Warranty1 Year over the counter exchange

4. ELAC

#ad

Silver EA101EQ-G, ELAC EA Series Integrated Amplifier

#ad
ELAC #ad - Bluetooth with aptX. At their heart is a brand new bash tracking amplifier delivering 80 watts per Channel into 4 ohms. Elac free ios and android app allows users to fully control and set up their system. Dolby digital decoding, the amp have an internal DAC. The companion ios and android app measures the near-field response of main speakers and subwoofer, then pinpoints the subwoofer's optimal crossover frequency and correct phase.
BrandELAC #ad
ManufacturerELAC AMERICAS LLC #ad
Height5.5 Inches
Length11.63 Inches
Weight6.1 Pounds
Width13.75 Inches
Part NumberEA101EQ-G
ModelEA101EQ-G
Warranty1 year manufacturer

5. BOSS Audio Systems

#ad

1100 Watt Amp, Remote Subwoofer Control, 2/4 Ohm Stable, Class A/B, Mosfet Power Supply, Subwoofer Amplifier, BOSS Audio Systems R1100M Monoblock Car Amplifier

#ad
BOSS Audio Systems #ad - Warranty - boss audio systems provides a powerful 3-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon. Com. Max power output of 550 Watts at 4 Ohms into one Channel. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.

A mobile electronics Certified Professional is recommended for installation & safety. Use 8 gauge or heavier wire. We strongly encourage professional installation of this product to ensure proper and safe functionality. Low pass crossover - a low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. Specs - dimensions: 9.

1” x 04” x 2. 3”, it can be installed in a variety of different places due to its’ slim and compact design, Weight: 4. 43 lbs. Power - maximum power output of 1100 watts at 2 ohms into one channel. Low level inputs - line level inputs, also known as rca inputs or low-level inputs, use RCA interconnect cables to link the R1100M with the source unit. You will use the Low-pass filter to primarily keep high notes out of your subwoofers.
BrandBOSS Audio Systems #ad
ManufacturerBOSS AUDIO #ad
Height2.25 Inches
Length9.13 Inches
Weight4.4 Pounds
Width10.44 Inches
Part NumberR1100M
ModelR1100M
Warranty6 Year Platinum Online Dealer Warranty valid only on products Sold / Shipped by Amazon.com. This offer is not valid on purchases made from third party market place sellers

6. Rockville

#ad

Rockville RV8.1A 400w 8" Loaded Car Subwoofer Enclosure+Mono Amplifier+Amp Kit

#ad
Rockville #ad - Bonded, stapled and Braced 3/5" MDF Cabinet. Rockville rv8. 1a single 8" bass enclosure System With matching Mono Block Amplifier. Quasi transmission Line Cabinet Design. Computer designed, under-Side Bass Reflex, Aero-Port System. 400 watts peak power / 125 watts RMS CEA-2031 Rating.
BrandRockville #ad
ManufacturerAudiosavings #ad
Height12 Inches
Length15.5 Inches
Weight21.31 Pounds
Width15.5 Inches
Part NumberRV8.1A
ModelRV8.1A
Warranty1 year manufacturer

7. OSD Audio

#ad

OSD Audio SMP300 Class D Digital Subwoofer Amplifier Rated at 300W Max

#ad
OSD Audio #ad - Efficient class d technology: a highly efficient Class D sub amp that is ideal for budget-minded users who want a feature-rich digital sub amp that does not run hot or take up a lot of space.

Adjustable controls: includes adjustable phase and low pass filter to dial in just the right amount of low frequency sound effects. Bring on the bass: a highly efficiency Class D subwoofer amplifier that serves up big bass with up to 300W max power. Works with all receivers: compatible with older and newer source equipment and includes LFE, line-level and speaker-level inputs for greater flexibility. Compact design: measures only 3” inches high, 9 ¼” deep and 16 ¼” wide to fit just about anywhere.
BrandOSD Audio #ad
ManufacturerOSD Audio #ad
Weight8 Pounds
Part NumberSMP-300
ModelSMP-300
Warranty2-Year Warranty

8. Massive Audio

#ad

Powered Car Subwoofer by Massive Audio BOOM88 Car Woofer Under Seat Slim Hideaway, Built in Amplifier, 8 Inch 400 Watt, Gain Remote Include, Low Profile Compact Underseat Woofer with Amazing Sound

#ad
Massive Audio #ad - Massive audio quality guaranteed | since 1999, massive audio has been an industry leader in high performance audio products. Or use standard RCA inputs. With our premium features like heavy duty aluminum heat sinks, Nickel Plated Connectors, Heavy Duty Power Supplies and Hi-E Capacitor filters with wide dynamic range and Class A/B design you will enjoy clearer sound reproduction than higher priced models.

With ground loop isolators, noise rejection circuitry, smart 5-way protection and a variable low pass crossover range of 50Hz – 150Hz @ -3dB you will enjoy a powerful high-quality bass reproduction that requires little cab space! DIMENSIONS: 13. 4” x 9. 8” x 2. 8”. Sold individually | produces powerful, clean, full sound | don't settle for a weak sounding and underpowered subwoofer just because you don’t have the space! This car audio subwoofer with amplifier features: Built-in OEM hi-level inputs that can take a high level speaker signal directly into the amplifier.

Quality tested and guaranteed to go beyond rated power | hits hard all the time! that is our guarantee! you don't need to set the gains too low to avoid distortion. Massive audio laid its roots in high quality audio reproduction through in-house engineering and a dedication to customers. This super slim hideaway powered subwoofer will OUTPERFORM most other competitors 10” and 12”. Great quality product that will last longer | don't settle for under powered and underwhelming active subs that are not efficient or distort at high power.
BrandMassive Audio #ad
ManufacturerMassive Audio #ad
Part NumberBOOM 88
Model8523720715
WarrantyAmazon.com Return Policy: You may return any new car audio product purchased from Amazon.com that is "dead on arrival," arrives in damaged condition, or is still in unopened boxes, for a full refund within 30 days of purchase. Amazon.com reserves the right to test "dead on arrival" returns and impose a customer fee equal to 15 percent of the product sales price if the customer misrepresents the condition of the product. Any returned audio product that is damaged through customer misuse, is missing parts, or is in unsellable condition due to customer tampering or abuse will result in the customer being charged a higher restocking fee based on the condition of the product. Amazon.com will not accept returns of any electronics more than 30 days after you receive the shipment. New, used, and refurbished products purchased from Marketplace vendors are subject to the returns policy of the individual vendor." Product Warranty: For warranty information about this product, please go to this link: https://www.massiveaudio.com/pages/warranty-policy

9. BELVA

#ad

Monoblock Amplifier, Amp Wire Kit, Belva 1200 Watt Peak Complete Subwoofer Package Includes Two 2 12-inch Subwoofers in Ported Box

#ad
BELVA #ad - 2-channel twisted-pair noise rejecting RCA cable! 10ft. Subs: two 12" belva subwoofers included! power handling: peak: 1200 watts total 600 watts each! Impedance: 4 ohm! SVC Polypropylene cone! Durable rubber surround! 1. 5" black aluminum voice coil! 37 oz. All you need: two 12-inch subwoofers, make your power and speaker connections, a ported enclosure, hook up your subs, a powerful amplifier, and all the wiring and connections required.

Once you get it home, then tune your amp and feel every note of your favorite music! Gray remote turn-on wire! 17ft. Frosted black 8 gauge ground wire! 17ft. Frosted red speaker wire! nickel plated die-cast zinc mini-anl fuse holder! 40A mini-ANL fuse 2 8 Gauge Nickel plated brass ring terminals! 5 14-16 Gauge Nickel plated brass spade terminals! 8 Gauge grommet! Frosted red 8 gauge power wire! 3ft.

Ferrite magnet motor structure! amplifier: class a/b monoblock amp! adjustable gain! lpf: 40-300hz! bass Boost: +0-12DB! One pair of preamp outputs! High level/speaker level inputs! Remote bass knob included! 25A fuse! Enclosure: dual 12" ported subwoofer enclosure preloaded with belva subwoofers! Tuned perfectly to get the best bass from the Belva subs! Dimensions: 3043" l x 14. 29" h x 11. 73" d! amp kit: complete 8 gauge amp kit with 2-channel rca cable! high strand count for maximum flexibility! 17ft.
BrandBELVA #ad
ManufacturerBelva #ad
Height18 Inches
Length33 Inches
Weight45 Pounds
Width15 Inches
Part NumberBPKG212V2
ModelBPKG212V2

10. Acoustic Audio by Goldwood

#ad

Acoustic Audio WS1005 Passive Subwoofer Amp 200 Watt Amplifier for Home Theater

#ad
Acoustic Audio by Goldwood #ad - To be used with passive subwoofers only, in Wall or In Ceiling Home Entertainment, Home Theater Systems, industrial Sound Systems, Multiple Room Systems. Lfe and rca inputs for use from a home audio receiver. Output impedance: 4-8 ohm. Power amplifier output: 200 watts, low bass Frequency Response of 50 – 200 Hz +/- 3dB. Raw wire outputs. Cl3 rated in wall certified raw speaker wire to connect your amp to the speaker. Sub volume and crossover control knobs.
BrandAcoustic Audio by Goldwood #ad
ManufacturerGoldwood Sound, Inc. #ad
Height2.25 Inches
Length8.5 Inches
Weight4.5 Pounds
Width6 Inches
Part NumberWS1005
ModelWS1005