Top 10 Argon ONE Pi 4 – Single Board Computers

As an Amazon Associate I earn from qualifying purchases.

1. Argon Forty

#ad

Argon ONE V2 Raspberry Pi 4 Case with Cooling Fan and Power Button | Supports Retro Gaming, Movies, and Music | for Raspberry Pi 4 Model B

#ad
Argon Forty #ad - The power button behind can perform a safe shutdown, reboot, or forced shutdown upon installation of proprietary script. The gpio pins are accessible on top of the case and protected by a removable magnetic cover. Can be booted manually or automatically by setting jumper pins inside the case. Minimizes clutter and makes cable management easy with all ports on the rear of the case. Cools the raspberry Pi as a heatsink and comes with a 30mm software controllable fan. Includes two full-sized HDMI ports and Built-in IR for remote functionality.
BrandArgon Forty #ad
ManufacturerArgon Forty #ad
Part NumberAR1_Rpi4_Case Only
ModelB07WP8WC3V

2. Argon Forty

#ad

And Music | for Raspberry Pi 4 Model B, Argon One Raspberry Pi 4 Case with Cooling Fan | Includes 5.25V/3.5A Power Supply | Aluminum Heatsink | Power Button | Supports Retro Gaming, Movies

#ad
Argon Forty #ad - The argon one case cools the pi as a heatsink, but can be cooled even further by the 30mm controllable fan. B>. Get ready to use your raspberry pi 4 with the argon one case and the Argon Power Supply with USB-C connector that generates regulated 5.

25v, 3. 5a at 18W. B>. The power button behind the case can do safe shutdowns, reboots, and forced shutdowns after installing the proprietary script. Clutter is quickly minimized with all the ports of the Raspberry Pi being placed behind the case. The gpio pins are protected and hidden by the removable magnetic lid on the Argon ONE Case when not being used.
BrandArgon Forty #ad
ManufacturerArgon Forty #ad

3. Argon Forty

#ad

Camera, Argon NEO Raspberry Pi 4 Model B Heatsink Case | Supports Cooling Fan, and LCD Display | GPIO and PoE Pins are Accessible

#ad
Argon Forty #ad - Supports up to the Raspberry Pi 4 4GB model. Small formed cooling case that especially keeps the Raspberry Pi 4 safe. The perfect raspberry Pi 4 Case that keeps your Pi cool even at maximum performance. Provides access to the camera module, Display Module, GPIO pins, and PoE pins.
BrandArgon Forty #ad
ManufacturerArgon Forty #ad
Part NumberAR_NEO_Case

4. Argon Forty

#ad

Argon ONE M.2 Raspberry Pi SSD Board M.2 Expansion Board ONLY

#ad
Argon Forty #ad - Only works with argon ONE Raspberry Pi 4 Case, which is sold separately. Package includes: m. 2 ssd sata board, 2 thermal pads, plastic bottom, USB3.0 bridge, 4 screws, 4 rubber footing, and instruction manual. Uasp supported for raspberry pi 4 | this raspberry Pi 4 SSD Board maximizes the high speed data transfers for Raspberry Pi 4. Ssd bootable | with this raspberry Pi sata board, you can install your OS in the M. 2 ssd. Adds m. 2 sata ssd compatibility to your raspberry Pi 4. M. 2 sata ssd compatibility: accepts any size of M. 2 sata ssd with b-key or B+M Key.
BrandArgon Forty #ad
ManufacturerArgon Forty #ad
Height0.71 Inches
Length4.33 Inches
Width3.82 Inches
Part NumberA20-002 AR-MDT
ModelA20-007-AR-MDT-EB

5. BOKIE

#ad

BOKIE Argon ONE M.2 Case for Raspberry Pi 4 Model B M.2 SATA SSD to USB 3.0 Board Support UASP Built-in Fan Aluminum Case

#ad
BOKIE #ad - 4. Argon one m. 2 case extended support for m. 2 sata ssds allows you to maximize the true potential speeds of your Raspberry Pi 4. It is compatible with any M.

2 sata ssd with key-b and Key B&M. 2. Argon one m. 2 is uasp supported for the raspberry pi 4 which means you can maximize the transfer speeds of your M. 2 sata drive. 3. Two full-sized ports. Power management Modes that allows for automatic booting. Integrated M. 2 sata ssd support through the USB 3 Ports of the Raspberry Pi 4. The argon one m. 2 case ups the ante by providing: 1. Built-in ir support with streamlined options for configuration. You will now be able to boot via an M. 2 sata ssd for faster boot times and larger storage capacity compared to the traditional - Card.
BrandBOKIE #ad
ManufacturerBOKIE #ad
Part Number522795
Model522795

6. Argon Forty

#ad

Argon Fan HAT for Raspberry Pi 4, and Rebooting, Raspberry Pi 3 B, Forced Shutdown, and Raspberry Pi 3 B+ | Includes 40mm Fan and Power Button | Provides Safe Shutdown

#ad
Argon Forty #ad - Even guves an easy-to-use fan controller allowing users to decide when the HAT should adjust the fan speed. Provides enough space for a heat sink to be used on the chips of the Raspberry Pi board. Can change fan speed based on CPU temperature. Only needs a one-line script for full functionality. A fan hat that uses a 40mm cooling fan to prevent overheating on the Raspberry Pi 3 B and Raspberry Pi 4. Comes with a power button that can be used to do forced shutdowns, safe shutdowns, and reboots to the Pi.
BrandArgon Forty #ad
ManufacturerArgon Forty #ad
Part NumberAR Fan HAT V1

7. Argon Forty

#ad

Raspberry Pi DAC Case | Digital to Analog Converter | Hi-Fi Player Rpi4 Not Included, Argon x NanoSound ONE

#ad
Argon Forty #ad - Low jitter | the i²s bus in this raspberry DAC offers lower jitter than usual for smooth audio experience. Cooling and protection | not only does this raspberry pi DAC case, but also acts as a heatsink for the Raspberry pi for safety and cooling.

Nanosound one player comes with a raspberry pi DAC Hat that is fully supported on the open source audio player OS - Volumio It can also support other OS. Full control | includes an infrared receiver and Remote Control to fully control your Raspberry Pi Soundcard and media player. Hi-res audio and warm sound | using the texas instruments pcm5122 chipset, this raspberry Pi DAC Sound Card provides audio at 192kHz Sampling Rate and 24bit Resolution with 112-db SNR.
BrandArgon Forty #ad
ManufacturerArgon Forty #ad
Part NumberC20-005 AR-NSO

8. LNIMI

#ad

LNIMI Argon ONE M.2 Case for Raspberry Pi 4 Model B M.2 SATA SSD to USB 3.0 Board Support UASP Built-in Fan Aluminum Case

#ad
LNIMI #ad - Power management Modes that allows for automatic booting. Built-in ir support with streamlined options for configuration. 4. The argon one m. 2 case ups the ante by providing: 1.

2. Integrated M. 2 sata ssd support through the USB 3 Ports of the Raspberry Pi 4. It is compatible with any M. 2 sata ssd with key-b and Key B&M. You will now be able to boot via an M. 2 sata ssd for faster boot times and larger storage capacity compared to the traditional - Card. Two full-sized ports. 3. Argon one m. 2 is uasp supported for the raspberry pi 4 which means you can maximize the transfer speeds of your M. 2 sata drive. Argon one m. 2 case extended support for m. 2 sata ssds allows you to maximize the true potential speeds of your Raspberry Pi 4.
BrandLNIMI #ad
ManufacturerLNIMI #ad
Part Number522795
Model522795

9. VERBAY

#ad

VERBAY Argon ONE M.2 Case for Raspberry Pi 4 Model B M.2 SATA SSD to USB 3.0 Board Support UASP Built-in Fan Aluminum Case

#ad
VERBAY #ad - You will now be able to boot via an M. 2 sata ssd for faster boot times and larger storage capacity compared to the traditional - Card. 2. Built-in ir support with streamlined options for configuration.

Argon one m. 2 is uasp supported for the raspberry pi 4 which means you can maximize the transfer speeds of your M. 2 sata drive. 4. Argon one m. 2 case extended support for m. 2 sata ssds allows you to maximize the true potential speeds of your Raspberry Pi 4. Power management Modes that allows for automatic booting. It is compatible with any M. 2 sata ssd with key-b and Key B&M. Integrated M. 2 sata ssd support through the USB 3 Ports of the Raspberry Pi 4. 3. Two full-sized ports. The argon one m. 2 case ups the ante by providing: 1.
BrandVERBAY #ad
ManufacturerVERBAY #ad
Part Number522795
Model522795

10. Flirc

#ad

Flirc Raspberry Pi 4 Case Silver

#ad
Flirc #ad - The best looking Raspberry Pi case made out of beautiful aluminum. All new manufacturing Process with improved metal quality and design. Made for the new Raspberry Pi 4. Gpio and all the main connectors are easily accessible through the bottom. Built in heat sink and comes with a thermal pad and 4 screws.
BrandFlirc #ad
ManufacturerFlirc #ad
Height1 Inches
Length3.5 Inches
Width2.5 Inches
Part NumberFL-70462